Configuration of the Telephone
Configure Number Blocking
164
Configure the Speed Dialling Keys
For all speed dialling keys programmed on function keys (see page 122) you can define after
pressing in the idle state if automatic off-hook should be enabled (when using the headset)
or switched to handsfree operation.
Configure Number Blocking
To prevent unauthorized persons from changing important settings, there are different levels
of authorization on the telephone.
When operating on the PBX COMpact 5010 VoIP, COMpact 5020 VoIP, COMmander
Basic.2 and COMmander Business the access to the telephone is divided into four levels of
authorization:
ț Administrator (access with the Admin PIN of the PBX),
ț Sub administrator (access with one of the four SubAdmin PINs of the PBX),
ț User (access with the user PIN that has been allocated to the subscriber) and
ț Guests (unprotected access).
The PINs are transferred from the PBX and cannot be changed on the telephone.
When operating on the PBX COMpact 2204 USB, COMpact 2206 USB, COMpact 4406 DSL,
COMpact 4410 USB and COMmander Basic the access to the telephone is divided into two
levels of authorization:
ț User (access with the user PIN) and
ț Guests (unprotected access).
The user PIN is configured on the telephone as described in the following.
Open the settings menu for the setting “speed
dialling key” (You will find help on page 33 and
the following).
settings
user settings
speed dial.key
The icon marks an activated
selection.
The icon marks a deacti-
vated selection.
Press the or softkey to the left of the
option you require to reverse the current sta-
tus.
ț auto. off hook: Activate/deactivate the auto-
matic off-hook when using the speed dialling
key.
...
...
Press the softkey to complete the settings.
