Need instructions for the tent WMC 141490

Asked by Alison on 07/31/2014 2  Answers

ManualsOnline posted an answer 9 years, 8 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
0 Ozark Trail Tent WMC-141490
2 Room Cabin Tent with Screen Porch

Step 1--->  
Pin floor to ground (room only!) with stakes. (If both room and patio are staked down, Step 2 is HARD)

Step 2--->  
Build black bars in front: straight-curved-curved-straight. Light blue marks, red in middle. Put bottom ends into pin-rings! (if patio were staked down, this last step is HARD). The assembly must arc towards the back.

Step 3--->
Build black bars in middle: straigt-straigt-straight. Dark blue marks. Put bottom ends into pin-rings. The assembly must arc towards the back.

Step 4--->
Build brown bars in rear: straight-U-straight. Yellow marks. Put bottom ends into pin-rings. The assembly must arc towards the back.

Step 5-->  LIFT:
LIFT the tent by staking the patio bottom ears to the ground. Use strong stakes: they hold the tent up!!!
When lifting, hold front bars, do not pull fabric.

Step 6--->
Tighten the brown body-strips (they are at middle, outside) to mid-pole.

Step 7--->
Tighten black ears (they are at middle, outside) to mid-pole. Use the brown bands found in bag.

Step 8--->
If part of tent are sagging, take separate stakes out (but not patio ones!), pull and pin down again.

Step 9--->
Stake the down-center ear (at room entry, inside porch) with a strong stake. It needs to hold strongly.

Step 10--->
Use black-white ropes to connect/pull from back ears. Stake them into ground. Use either all 3, or only the left/right 2, or only the middle one, or none. If using the middle one, tignten to create U-shape in the top cover to act as water channel.
Was this answer helpful?
0 Ozark Trail Tent WMC-141490
2 Room Cabin Tent with Screen Porch

Step 1--->  
Pin floor to ground (room only!) with stakes. (If both room and patio are staked down, Step 2 is HARD)

Step 2--->  
Build black bars in front: straight-curved-curved-straight. Light blue marks, red in middle. Put bottom ends into pin-rings! (if patio were staked down, this last step is HARD). The assembly must arc towards the back.

Step 3--->
Build black bars in middle: straigt-straigt-straight. Dark blue marks. Put bottom ends into pin-rings. The assembly must arc towards the back.

Step 4--->
Build brown bars in rear: straight-U-straight. Yellow marks. Put bottom ends into pin-rings. The assembly must arc towards the back.

Step 5-->  LIFT:
LIFT the tent by staking the patio bottom ears to the ground. Use strong stakes: they hold the tent up!!!
When lifting, hold front bars, do not pull fabric.

Step 6--->
Tighten the brown body-strips (they are at middle, outside) to mid-pole.

Step 7--->
Tighten black ears (they are at middle, outside) to mid-pole. Use the brown bands found in bag.

Step 8--->
If part of tent are sagging, take separate stakes out (but not patio ones!), pull and pin down again.

Step 9--->
Stake the down-center ear (at room entry, inside porch) with a strong stake. It needs to hold strongly.

Step 10--->
Use black-white ropes to connect/pull from back ears. Stake them into ground. Use either all 3, or only the left/right 2, or only the middle one, or none. If using the middle one, tignten to create U-shape in the top cover to act as water channel.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.