Filter
Top Products
16
36. Route the Press Cable (88) over the indicated
3 1/2” Pulley (82) attached to the Press
F
rame (12). B
e sure that the Cable Trap
(80) is turned to hold the Cable in place
a
nd that the Cable is between the Pulley
and the crossbar on the Press Frame.
Tighten the 3/8” Nylon Locknut (42) and the
3/8” x 3 1/2” Bolt (not shown).
37. Wrap the Press Cable (88) around a “V”
Pulley (81). Attach the “V” Pulley to the lower
bracket on the Leg Press Upright (4) with a
3/8” x 2 1/4” Bolt (97) and a 3/8” Nylon Jam
Nut (43).
38. Wrap the Press Cable (88) around a 3 1/2”
Pulley (82). Attach the Pulley and a Cable
Trap (80) to the Leg Press Arm (9) with the
3/8” x 5” Bolt (74).
Slide another 3 1/2” Pulley (82) with a Cable
Trap (80) onto the 3/8” x 5” Bolt (74). Hand
tighten a 3/8” Nylon Locknut (42) onto the
Bolt.
Do not tighten the Nylon Locknut
until step 40.
39. Wrap the Press Cable (88) around a “V”
Pulley (81). Attach the “V” Pulley and a Large
Cable
T
rap (83) to the bracket on the Front
Seat Frame (8) with a 3/8” x 2 1/2” Bolt (65)
and a 3/8” Nylon Locknut (42). Be sure that
the Large Cable T
rap is turned to hold the
Cable in place and that the Cable and
Pulley move smoothly.
39
36
37
38
CABLE ASSEMBLY
83
65
81
88
42
8
8
8
42
12
Crossbar
82
80
42
82
82
9
80
80
74
88
88
81
4
97
43