Filter
Top Products
3. Press a 2Ó Square Inner Cap (56) into the end of the
Top Frame (2). Press a 2Ó Square Inner Cap (56) into
each side of the Butterfly Frame (3). Press two 1Ó
Round Inner Caps (70) into the top of the Butterfly
Frame.
Insert a 5/16Ó x 3Ó Bolt (92) through the bracket on
the Butterfly Frame (3) and the Top Frame (2). Make
sure that the Bolt is on the side shown. Tighten a
5/16Ó Nylon Jam Nut (91) with a 5/16Ó Washer (20)
onto the Bolt.
Insert a 5/16Ó x 2 3/4Ó Bolt (55) through the bracket
on the Butterfly Frame (3) and the Top Frame (2).
Make sure that the Bolt is on the side shown.
Hand tighten a 5/16Ó Washer (20) and a 5/16Ó Nylon
Locknut (40) onto the Bolt.
4. Slide the Front Seat Frame (8) onto the indicated
5/16Ó x 2 1/2Ó Carriage Bolts (49) in the Press Base
(13). Hand tighten two 5/16Ó Nylon Locknuts (40) onto
the Carriage Bolts.
Attach the other end of the Front Seat Frame (8) to
the Leg Press Upright (4) with two 5/16Ó x 2 3/4Ó Bolts
(55), two 5/16Ó Washers (20) and two 5/16Ó Nylon
Locknuts (40).
Press a 2Ó Square Inner Cap (56) into the Front Seat
Frame (8).
3
6
2
3
55
40
20
56
56
56
92
70
91
20
4
55
20
49
40
56
8
40
4
13