Filter
Top Products
9
10. Slide sixteen Weights (30) onto the Weight
Guides (9). Make sure the slots for the Weight
Pin (not shown) are on the indicated side and
on the bottom of the Weights.
Press a Weight Tube Bumper (35) into a Weight
Tube (34). Insert the Weight Tube into the stack
of Weights (30) as shown.
Lubricate the indicated holes in a Top Weight (31)
with grease. Slide the Top Weight onto the Weight
Guides (9). Make sure that the groove on the
Top Weight for the Weight Tube (34) pin is on
the bottom of the Top Weight.
Lubricate
Slot
Pin
Groove
Pin
9
34
31
35
30
10
9. Slide two Weight Bumpers (50) onto the two
Weight Guides (9).
Attach the Weight Guides (9) to the Right Base
(1) with two M10 x 67mm Bolts (88), four M10
Washers (74), four 12mm Spacers (57), and two
M10 Nylon Locknuts (75).
9
75
75
57
57
57
57
74
74
74
88
88
9
50
50
1