Filter
Top Products
10
11. Press a 40mm x 60mm Inner Cap (42) and two
40mm x 60mm Thick Inner Caps (89) into the Left
Top Frame (11).
Attach the Left Top Frame (11) to the Left Upright
(6) with two M10 x 62mm Bolts (92), a Support
Plate (29), and two M10 Nylon Locknuts (75). Do
not tighten the Locknuts yet.
12. Press a 40mm x 60mm Inner Cap (42) into the
Right Top Frame (10). Press two 25mm Round
Outer Caps (47) onto the Right Top Frame.
11
12
89
89
11
47
47
42
29
42
92
75
75
10
6
13. Attach the Right Top Frame (10) to the Weight
Guides (9) with two M10 x 67mm Bolts (88), four
M10 Washers (74), four 12mm Spacers (57), and
two M10 Nylon Locknuts (75). Do not tighten the
Locknuts yet.
Attach the Right Top Frame (10) to the Right
Upright (5) with two M10 x 62mm Bolts (92), a
Support Plate (29), and two M10 Nylon Locknuts
(75). Do not tighten the Locknuts yet.
13
57
57
88
10
9
5
75
75
92
29
74
74
74
57
57
75
75
88
74
14. Attach the Right Top Frame (10) to the Left Top
Frame (11) with three M10 x 78mm Bolts (86),
three M10 Washers (74), and three M10 Nylon
Locknuts (75).
Tighten the M10 Nylon Locknuts (75) used in
steps 3–14.
14
10
75
75
11
86
86
74
74