Vision Fitness T9800 Series Treadmill User Manual


  Open as PDF
of 3
 
HARDWARE INCLUDED
Screwdriver
TOOLS, HARDWARE, & PARTS INCLUDED
PARTS BOX
Water Bottle, Qty: 1
Handlebars, Qty: 2
Handlebar Covers, Qty: 2
Power Cord, Qty: 1
Color-coded Hardware Bags
ORANGE BAG
BLUE BAG
Assembly
Guide
T9800 Series
TREADMILLS
500 South CP Avenue • P.O. Box 280 • Lake Mills, WI 53551
toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373
www.visionfitness.com
©2007 Vision Fitness. All Rights Reserved. 5.07
AG18.39PRD
REV7
M10 x 20L Bolt
Quantity: 4
PINK BAG
M8 x 15L Socket Head
Quantity: 8
5mm L-Shaped Wrench
5
STEP
DO NOT STAND ON THE BELT WHEN PERFORMING AUTO-CALIBRATION
You need to access User Engineering Mode to run the auto-calibration.
With the safety key in place
, please hold
down SPEED DOWN and ENTER for 5 seconds. When in the User mode,
“USER ENG MODE”
appears in the
alphanumeric window. To access the data press the ELEVATION keys until
“AUTO-CALIBRATION”
appears.
To begin auto-calibration, press ENTER. The treadmill will run through minimum and maximum speed and
maximum incline. This will take 3-5 minutes. Let the treadmill perform this complete function before exiting the
Engineering Mode.
Elevation A/D appears in the left window. PWM value appears in the dot matrix window, and speed appears in
the right window.
“CALIBRATION PASSED”
will appear in the alphanumeric window when the auto-calibration is
complete. The treadmill will come to a complete stop and return to the start-up screen in the alphanumeric window.
AUTO-CALIBRATION
8.2x19x2T Flat Washer
Quantity: 8
10.2x19x2T Flat Washer
Quantity: 4
M8 x 15L Socket Head
Quantity: 4
8.2x19x2T Flat Washer
Quantity: 4
M8 x 15L Flat Head
Quantity: 2
6.5x19x2T Flat Washer
Quantity: 4
6.5x13x1T Arc Washer
Quantity: 2
M6 x 15L Socket Head
Quantity: 6
6mm L-Shaped Wrench
8mm T-Shaped Wrench
M5 x 12L Phillips Head
Quantity: 2
next