Vision Fitness T9300HRT Treadmill User Manual


 
USER ENGINEERING MODE
(Models T9300HRT/T9500HRT/T9500HRT Ortho/T9600HRT Comfort Only)
Your treadmill offers a User Engineering Mode that can access certain data
and help to troubleshoot your treadmill. User Engineering Mode is designed
for you to access functions that will not affect important treadmill settings. To
access this mode please hold down SPEED DOWN and SELECT for
5 seconds while the treadmill is in any state of setting up a program. When
in the User mode,
"USEr"
displays in the center window. To access the data
press the ELEVATION keys to scroll through the available data/functions. To
select the data/function, press START. To exit, press STOP.
UNITS
P6 represents units, English or Metric. You can select this configuration for
your treadmill.
A number appears in the right window. If it is even, the treadmill is
configured in English units (miles/mph); an odd number represents a
Metric configuration (kilometers/kph). Press the SPEED arrows to toggle
between English and Metric.
In order to save the modified value, press SELECT. Note that changing units
does affect the stored value of weight and clears any stored user programs.
Changing units may also require you to perform auto-calibration.
DEFAULT WEIGHT
P8 represents default weight. Weight appears in the right window. To
modify weight, press the SPEED arrows. To save the new default weight,
press SELECT prior to exiting. If Units is modified immediately prior, weight
defaults to 150 lbs. or 68 kg.
ACCUMULATED TIME
P9 represents accumulated time, in hours. The SPEED keys are disabled
while viewing. To exit, press STOP. This information can not be modified.
ACCUMULATED DISTANCE
P10 represents accumulated distance, in either miles or kilometers. The
SPEED keys are disabled while viewing. To exit, press STOP. This
information can not be modified.
29
GENERAL