Trek 11i Bicycle User Manual


 



CLK TME AVG MAX TRP AVG
MPH
F


Mode
Set
When setting the computer, there
are three ways to use the buttons. To
help you remember, notice the way
each term is underlined. To help you
remember, these terms will look the
same throughout the manual.
Push- touch once
Cycle - push repeatedly as needed
Hold- push and hold in for two or
three seconds
The buttons on the computer are
(Figure 12):
Set• button on the right side
Mode button on the bottom
To set the computer, you must Push, Cycle, or Hold the two
buttons in a specific sequence.

1. Cycle Mode to MAX (Figure 12).
2. Hold Set•
KMH or MH flashes.