Filter
Top Products
Please read instructions carefully to understand how to operate your Reebok® watch.
THANK YOU FOR PURCHASING YOUR REEBOK® WATCH.
FEATURES
Time/date (12/24 hour format • MMDD/DDMM format • two Time Zones • hourly Chime)
Countdown timers (up to 24 hours • stop, start, or start chrono at end • 9 intervals)
Three alarms (Daily/weekday/weekend/weekly • 5-minute backup)
Chronograph (175-lap storage • workout recall by date • average/best time display • on-the-fly lap
recall • elapsed time counter)
INDIGLO® night-light with NIGHT-MODE® feature.
TIME/DATE/HOURLY CHIME
1. In TIME mode, press and hold SET/RECALL. Time Zone flashes.
2. Press + or – to select Time Zone 1 or 2.
3. Press NEXT to set hour. Digits flash.
4. Press + or – to change hour. Scroll through 12 hours to change to AM/PM.
5. Press NEXT and + / – to set minutes.
6. Press NEXT and + / – to set seconds to zero.
7. Continue pattern to set day of week, month, date, 12-hour (AM/PM) or 24-hour military time format,
MM.DD or DD.MM date format, turn hourly Chime on/off, turn Beep on/off. If you select Beep on,
beep will sound every time you push a button except INDIGLO.
8. Press NEXT to set second Time Zone, following procedure above.
9. Press DONE to exit.
TIPS: • Press and hold START/SPLIT briefly to peek at second Time Zone.
• Press and hold START/SPLIT for 4 seconds to change Time Zone displayed.
• In other modes, press and hold MODE to view Time, release to return to current mode.
BASIC OPERATIONS
When setting, each button has a different function as indicated above. Display indicates when button
changes function.
SET/ OR DONE (To
RECALL save changes
and exit
setting)
MODE OR
NEXT
(Proceed to
next step)
START/ OR
+ (Increase value.
SPLIT Hold to increase rapidly.)
INDIGLO
STOP/ OR – (Decrease value.
RESET Hold to decrease
rapidly.)
CHRONO
Watch counts up to 199 laps (maximum of 100 hours) and stores first 175 laps.
Run Chrono:
1. Press MODE until CHRONO appears.
2. Press START/SPLIT to start Chrono. Chrono continues to run if you exit the mode.
3. Press START/SPLIT to take a split. Lap number appears on top line of display.
4. Display will freeze for 10 seconds. Press MODE to release display and see running Chrono.
5. Press STOP/RESET to stop or pause Chrono. Press START/SPLIT to resume.
6. When workout is completed, you have two options: Press and hold SET/RECALL to store workout or
press and hold STOP/RESET to clear workout (both reset chrono to 00:00:00).