Star Trac S-RBX RECUMBENT BIKE Exercise Bike User Manual


 
24
STAR
TRAC
S
SERIES
BIKES
O
WNER
S
M
ANUAL
n Use the keys to enter a resistance level (from 1 to 20) or press the or key, as desired, to increase or
decrease the resistance LEVEL in 1 unit increments.
n When the desired resistance LEVEL has been entered, press the key to accept the displayed LEVEL.
6. If desired, you can use the personal fan during your workout (see “Using the Personal Fan” for details).
7. You can adjust the resistance LEVEL during the program, using either of the following methods:
n Use the keys to enter a resistance level (from 1 to 20). When the desired level has been entered, press the
key to confirm the resistance level.
n Press the or key, as desired, to increase or decrease the resistance LEVEL in 1 unit increments.
8. If you wish to pause the program, stop pedaling. The bike enters pause mode and a “P” flashes in the TIME Window.
Resume pedaling within 25 seconds to continue your workout.
9. If desired, you can jump to another preset program if your remaining workout time is greater than 5 minutes.
n To jump to another preset program, press the
or key, as desired.
10. When you have reached your workout goal, the bike enters the Cooldown cycle (see “Cooldown Cycle” for details). If you
wish to exit the program before you have reached your workout goal, stop pedaling and allow the Pause timer to expire.
INCREASE ENDURANCE PROGRAM
The INCREASE ENDURANCE program allows the user to pre-program a time goal, user weight and maximum resistance level (from
1 to 20). The program begins at a resistance level of 1, then increases linearly to the specified maximum resistance level.
To operate the INCREASE ENDURANCE program:
1. Mount the bike (refer to “Seat Adjustments” section) and begin pedaling,
n If necessary, enter the Lockout ID to enable the bike for operation (see “Lockout ID Processing” for details).
2. Press the key.
3. You are prompted to enter your weight. The bike displays a default weight of 155 pounds (70 kg). You may enter any
weight from 0 to 500 pounds (0 to 226 kg).
n Use the keys to enter your current weight; or press the or key, as necessary, to increase or decrease
the displayed weight in 1 pound (or 1 kg) increments.
n When your correct weight has been entered, press the key to accept the displayed value.
4. You are prompted to enter a time goal.
The default time is 99 minutes. You may enter any time from 1 to 99 minutes.
n Use the keys to enter your desired time goal; or press the or key, as necessary, to increase or
decrease the displayed value in 1 minute increments.
n When your desired goal has been entered, press the key to accept the displayed value.
5. You are prompted to enter a maximum resistance LEVEL.
n Use the keys to enter a resistance level (from 1 to 20) or press the or key, as desired, to increase or
decrease the resistance LEVEL in 1 unit increments.
n When the desired resistance LEVEL has been entered, press the key to accept the displayed LEVEL.
6. If desired, you can use the personal fan during your workout (see “Using the Personal Fan” for details).
7. You can adjust the resistance LEVEL during the program, using either of the following methods:
n Use the keys to enter a resistance level (from 1 to 20). When the desired level has been entered, press the
key to confirm the resistance level.
n Press the or key, as desired, to increase or decrease the resistance LEVEL in 1 unit increments.
8. If you wish to pause the program, stop pedaling. The bike enters pause mode and a “P” flashes in the TIME Window.
Resume pedaling within 25 seconds to continue your workout.