Stamina Products 15-4525 Bicycle User Manual


 
14
STORAGE
1.
2.
3.
4.
To store the Air Fusion 4525 Bike, simply keep it in a clean dry place.
Adjust the SEAT FRAME(5) to the lowest position. The Air Fusion 4525 Bike is approximately 51 3/4
inches long x 24 3/8 inches wide x 35 3/4 inches tall (min.). These dimensions will vary. Please measure
your Air Fusion 4525 Bike if exact dimensions are needed.
To move the Air Fusion 4525 Bike, lift the REAR STABILIZER(4) and the bike will roll on the WHEELS(51)
on the FRONT STABILIZER(2).
To avoid damage to the electronics, remove the batteries before storing the Air Fusion 4525 Bike for
one year or more.
MAINTENANCE
The safety and integrity designed into the Air Fusion 4525 Bike can only be maintained when the Air
Fusion 4525 Bike is regularly examined for damage and wear. Special attention should be given to the
following:
Adjust the TENSION KNOB(29) and verify that the TENSION BELT(28) provides tension. The TENSION
BELT(28) should provide many years of use.
Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that the
left pedal has left hand threads and is tightened by turning counterclockwise.
Verify that the WARNING LABEL(78) is in place and easy to read. Call Stamina Products immediately at
1-800-375-7520 for a replacement WARNING LABEL(78) if it is missing or damaged.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or damaged components shall be replaced immediately or the Air Fusion 4525 Bike removed
from service until repair is made.
Only Stamina Products supplied components shall be used to maintain/repair the Air Fusion 4525 Bike.
Keep your Air Fusion 4525 Bike clean by wiping with an absorbent cloth after use.
1.
2.
3.
4.
5.
6.
7.