ProForm PFTL61931 Treadmill User Manual


 
15
To stop the program at any time, press the Stop
button. The Pace/Time display will begin to flash.
To restart the program, press the Start
button or
the Speed + button. The walking belt will begin to
move at 1 mph.
When the next segment of the pro-
gram begins, the treadmill will automatically adjust
to
the speed and incline settings for the next seg-
ment.
Follow your progress with the displays.
See step 5 on page 12.
Measure your heart rate if desired.
See step 6 on page 13.
Turn on the fan if desired.
See step 7 on page 13.
When you are finished exercising, remove the
key from the console.
When the program ends, make sure that the in-
cline of the treadmill is at the lowest setting.
Next, remove the key from the console and put it in
a secure place. Note: If the displays and various
indicators on the console remain lit after the
key is removed, the console is in the “demo”
mode. See page 23 and turn off the demo mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position and unplug the power cord.
7
6
5
4