Filter
Top Products
132
MAINTENANCE
General Maintenance
Periodically check the condition and tension of the drive belt, and
always carry a spare belt. F or improved drive-away during extremely
cold temperatures, r emove the belt and warm it to room temperature.
Reinstall i t before starting the snowmobile.
Standard Belt Removal
1 Be sure the key switch is off
and the engine has come to a
complete stop. Remove the
retaining pin and open the
clutch guard.
2 Apply brake (or lock parking
brake if equipped).
3 Grasp the belt firmly
midway between the clutches
and pull upward and
rearward. Remove the belt.
Electron ic Reverse Belt Removal
1 Remove ONE of the three
belt tension adjuster bolts
(A) and store it in a safe
place.
2 Locate the 1 1/2” bolt from
the tool kit and install i t in
the empty tensioner hole. As
this bolt is tightened, it will
open the sheaves, loosening
the belt to the point where it
can be easily removed.
3 Grasp the belt firmly midway between the clutches and pull
upward and rearward. Remove the belt.
4 If a belt is not going to be immediately reinstalled, reinstall the
tensioner bolt and store the 1 1/2” bolt i n t he tool kit of the
machine.
A
A
A