ParaBody 912101 Home Gym User Manual


  Open as PDF
of 6
 
FIGURE 5
STEP 5:
A. Remove the BOLT & WASHERS below the PULLEY in upright. See FIGURE 5,
B.
Insert the threaded end of CABLE (part #6671001) under the PULLEY in UPRIGHT and around the
bottom PULLEY of the PULLEY BLOCK. See FIGURE 5.
C.
Fasten end of CABLE (part #6671001) into threaded housing on the base of BENCH FRAME.
D. Tighten jam nut securely.
.
E. Securely fasten previously removed BOLT & WASHER. (NOTE: The CABLE (part #6671001) should
be routed over the bolt and washer.
5
 previous