Oregon Scientific PE988 Fitness Electronics User Manual


 
Walk Around the World
Pedometer
MODEL: PE988
USER MANUAL
INTRODUCTION
Thank you for selecting the Oregon Scientic™ Walk Around
the World Pedometer (PE988).
The PE988 is more than just a traditional pedometer. On
top of the traditional features such as step count, distance
count and calorie count, this product is designed with the
purpose of blending fun, challenges and rewards into the
sport of walking.
IMPORTANT
Do not immerse the pedometer in water.
CONTROL BUTTONS
1
2
3
1. SET: To conrm and move to next setting option
2.
DISP: To select options; to increase values
3.
MODE: To select modes; to decrease values
LCD
1. : Indicates battery power is low
2.
: Indicates achieved summary of the trip is displayed
3.
: Indicates targets to achieve of the selected trip is
displayed (trip diary)
4.
: Indicates key tone is On
5.
: Indicates target summary of the selected trip plan is
displayed
6.
: Indicates the button(s) that can be
pressed
7.
: Indicates alarm is ON
8.
: Indicates on which day (1-7) before is the
displayed data recorded
GETTING STARTED
ACTIVATE PEDOMETER (FIRST-TIME USE ONLY)
Remove the battery-saving strip by pulling it out from the
battery compartment. The unit will automatically prompt you
to set your stride length. Refer to Set Up Mode to set your
stride length and other settings.
NOTE The unit will go to Sleep Mode like the screen below
then the display will turn off if no movement is detected for 3
minutes; once there is movement detected, the display will
turn on.
NOTE To effectively use the pedometer for calculating
calorie consumption (based on step count and user body
weight) and distance walked (based on step count and
length of user’s stride), you are advised to set the time and
your user data in the Set Up Mode.
CARRYING THE PEDOMETER
The PE988 is a sensor type pedometer that can detect steps
in any dimension it is carried. It can be carried in pockets
and handbags or around the neck by using the lanyard
provided.
BATTERY REPLACEMENT
The pedometer uses a CR2032 3V battery, which has
already been installed.
Indicates battery power is low.
To replace battery:
1. Use a small Philips screwdriver to remove battery
compartment lid.
2. Remove the old battery and insert the new one, matching
the polarities.
3. Replace the lid by screwing it back into place using a
small Philips screwdriver.
IMPORTANT
When the battery compartment is opened or
battery is replaced, all data in the pedometer will be reset.
OPERATION MODES
The PE988 has 5 modes of operation. Press MODE to toggle
among the 5 modes.
NOTE After a mode is selected, either wait until the moving
banner stops to enter the mode you have selected or you
can press SET to skip the banner.
DAILY MODE
In the Daily Mode, you can view:
the time and current step count (default display)
the current step count, current distance walked, exercise
time and calorie consumption (by reverse display of the
unit)
the achieved summary of the selected trip plan (if a trip
plan is selected)
NOTE The step count, exercise time, distance walked and
calorie consumption values will reset automatically to zero
every night at 00:00.
To view the current step count, current distance walked,
exercise time and calorie consumption:
Reverse the unit 180° upside down.
The default display will be changed to show the current
distance walked and step count page. After 3 seconds, the
unit will auto-toggle to the next page showing the current
exercise time and calorie consumption. In reversed display,
the unit will auto-toggle between these 2 pages.
To resume default display, reverse the unit to its original
position.
EN
Current time and step count
Current distance walked and
step count
Current exercise time and
calorie consumption
To view the accumulated cities, rewards, days,
distance and steps achieved of the trip plan (achieved
summary):
Press SET during the default display.
The cities achieved will be displayed and after 3 seconds,
the unit will auto-toggle to show the accumulated rewards,
days, distance and steps achieved. The achievement bar
shows how far you have achieved before the target. After 3
seconds, it will auto-toggle to the default display.
Cities achieved
Rewards achieved
(refer to table below)
Days achieved and
trip plan
Distance and steps
achieved
Achievement bar
The table below lists the rewards that you will receive if
target cities are achieved.
Borsch soup
Sushi
Noodle
Tea
Hotdog
Beijing duck
Croissant
Pizza
Jamon
Chocolate
Kebab
Feijoada
Lobster
Fish
Steam bun
Pretzel
Herring
Waffle
Reward to receiveCity achieved
Moscow
Tokyo
Hong Kong
London
New York
Beijing
Paris
Rome
Barcelona
Zurich
Dubai
Sao Paulo
Sydney
Cape Town
Shanghai
Berlin
Stockholm
Brussels
WALK MEMORY MODE
In the Walk Memory Mode, you can view the records of your
distance walked, number of steps, exercise time and calorie
consumption for the past 7 days.
1. Press
MODE to toggle to Walk Memory Mode. The unit
will auto-toggle between the distance walked and number
of steps, and the exercise time and calorie consumption.
Press SET to fast toggle.
Distance and steps walked
Exercise time and
calorie consumption
2. Press DISP or MODE to select which day to view: DISP
to go to the next day, MODE to go to the previous day.
3. To exit and return to the default display, either keep on
pressing DISP to toggle through all 7-day records or
refrain from pressing any button for at least 3 seconds.
To reset records:
You cannot reset the records manually. The pedometer is
designed to automatically reset whenever a new trip plan is
selected.
TRIP PLAN MODE
In the Trip Plan Mode, you can select an exercise (trip) plan
and achieve its target.
If a trip plan is already selected, this Mode will be hidden
automatically. You have to complete the selected trip plan
before you can select a new one.
If no trip plan has been selected yet, follow the steps below
to select a trip plan.
1. Press
MODE to toggle to Trip Plan Mode.
2. The unit will prompt you to select your exercise (trip)
plan. You have 6 trip plans to select from (refer to the
table below). Press DISP to select and SET to conrm.
After a trip plan is selected, the unit will auto-toggle and
show the screens below. It will nally auto-toggle to the
default display; you can then start walking.
Starting city and final destination
(e.g. if trip plan 2 is selected, the
starting city is Rome and the final
destination is London)
Target distance and time
3. Start walking continuously for 16 steps or more in order
for the pedometer to start counting steps. Do this every
time you start walking.
The table below lists the 6 trip plans.
TRIP 1
From
To
Target distance
(OS-KM)
Target time to
achieve (days)
Berlin Brussels 6.52 1.30329
Brussels London 3.20 0.640382
London Paris 3.38 0.67578
Total 13.10 Total 2.619452
TRIP 2
From To
Target distance
(OS-KM)
Target time to
achieve (days)
Rome Zurich 6.92 1.38374
Zurich Stockholm 14.74 2.947688
Stockholm Moscow 12.36 2.471424
Moscow London 24.94 4.9879
Total 58.95 Total 11.790752
TRIP 3
From To
Target distance
(OS-KM)
Target time to
achieve (days)
Tokyo Hong Kong 28.96 5.7924
Hong Kong Shanghai 12.53 2.506822
Shanghai Beijing 10.62 2.12388
Beijing Dubai 58.47 11.694212
Total 110.59 Total 22.117314
TRIP 4
From To
Target distance
(OS-KM)
Target time to
achieve (days)
Barcelona Sao Paulo 87.64 17.528446
Sao Paulo Cape town 63.56 12.7111
Cape town Brussels 94.90 18.979764
Brussels Rome 11.83 2.36523
Total 257.92 Total 51.58454
TRIP 5
From To
Target distance
(OS-KM)
Target time to
achieve (days)
New York Shanghai 118.42 23.68448
Shanghai Stockholm 77.80 15.55903
Stockholm Hong Kong 82.36 16.472942
Hong Kong Dubai 59.16 11.832586
Dubai Brussels 51.57 10.31369
Brussels Sao Paulo 96.36 19.272602
Total 485.68 Total 97.13533
TRIP 6
From To
Target distance
(OS-KM)
Target time to
achieve (days)
Barcelona Stockholm 22.94 4.588868
Stockholm London 14.35 2.870456
London Sydney 169.94 33.988516
Sydney Tokyo 77.96 15.59121
Tokyo Berlin 89.12 17.824502
Berlin London 9.30 1.860004
London Beijing 81.25 16.2509
Beijing Sao Paulo 175.94 35.18883
Total 640.82 Total 128.163286
NOTE:
1 km = 1/100 OS-KM
Walking faster and with longer strides can achieve
the target within lesser days.
TRIP DIARY MODE
In the Trip Diary Mode, you can view your trip plan's detailed
target summary. If no trip plan is selected, this Mode will be
hidden automatically.
Press MODE to toggle to Trip Diary Mode. The unit will auto-
toggle every 3 seconds, showing the following:
All starting and destination cities
The selected trip plan, total days to achieve and total
destination count
The total distance and days to achieve
SET UP MODE
In the Set Up Mode, you can set your stride length, weight,
time, alarm and key tone.
1. Press
MODE to toggle to Set Up Mode.
2. Wait for the setting option to ash, then press
DISP or
MODE to select option.
3. Press SET
to conrm and move to the next setting
option.
The setting sequence is:
stride length unit (cm / in) [press
DISP]
stride length value [press
DISP or MODE]
weight unit (kg / lb) [press
DISP]
weight value [press
DISP or MODE]
time format (12 / 24) [press
DISP]
time (hour and minute) [press
DISP or MODE]
alarm On/Off [press
DISP]
alarm time (hour and minute) (if alarm On is selected)
[press DISP or MODE]
key tone On/Off [press
DISP]
To silence an activated alarm:
Press any button to silence an activated alarm. If not
deactivated, the alarm will be activated at the same time the
following day.
ANIMATION
The table below lists the scenarios that are associated with
the animations featured in this pedometer.
ANIMATIONSCENARIO
If you successfully
complete the trip
within target
If you fail to complete
the trip within target
If there is no activity
for 24 hours
Back to default display
Press SET if you
want to select your
next trip then follow
steps 2 and 3 in Trip
Plan Mode, or press
MODE to exit.
Press SET if you
want to select a new
trip then follow steps
2 and 3 in Trip Plan
Mode, or press
MODE to exit.
SPECIFICATIONS
Real time clock
12 / 24 format with hour
/ minute
Step measurement range 0 – 99,999 steps
Distance measurement range
0 – 9999.99 km
(0 – 621 miles)
User adjustable stride length
28 – 152 cm
(11 – 60 inches)
Calorie measurement range 0 – 99,999 kcal
Body weight range
29 – 154 kg
(64 – 340 lbs)
Exercise timer range 99 hr 59 min 59 sec
Water resistance No
Power 1 x CR2032 3V battery
Operating temperature
-10°C to 40°C
(14°F to 104°F)
Storage temperature
-20°C to 60°C
(-4°F to 140°F)
PRECAUTIONS
To ensure you use your product correctly and safely, read
these warnings and the entire user manual before using the
product:
Use a soft, slightly moistened cloth. Do not use abrasive
or corrosive cleaning agents, as these may cause
damage. Use lukewarm water and mild soap to clean the
device thoroughly after each training session. Never use
the product in hot water or store it when wet.
Do not subject the product to excessive force, shock,
dust, temperature changes, or humidity. Never expose
the product to direct sunlight for extended periods. Such
treatment may result in malfunction.
Do not tamper with the internal components. Doing so will
terminate the product warranty and may cause damage.
The main unit contains no user-serviceable parts.
Do not scratch hard objects against the LCD display as
this may cause damage.
Take precautions when handling all battery types.
Remove the batteries whenever you are planning to
store the product for a long period of time.
When replacing batteries, use new batteries as specied
in this user manual.
The product is a precision instrument. Never attempt to
take this device apart. Contact the retailer or our customer
service department if the product requires servicing.
Do not touch the exposed electronic circuitry, as there is
a danger of electric shock.
Check all major functions if the device has not been
used for a long time. Maintain regular internal testing and
cleaning of your device. Have your device serviced by an
approved service centre annually.
When disposing of this product, ensure it is collected
separately for special treatment and not as normal
household waste.
Due to printing limitations, the displays shown in this
manual may differ from the actual display.
The contents of this manual may not be reproduced
without the permission of the manufacturer.
NOTE The technical specications for this product and the
contents of the user manual are subject to change without
notice.
NOTE Features and accessories will not be available in all
countries. For more information, please contact your local
retailer.
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientic.com) to learn more
about Oregon Scientic products.
If you're in the US and would like to contact our Customer
Care department directly, please visit:
www2.oregonscientic.com/service/support.asp
For international inquiries, please visit:
www2.oregonscientic.com/about/international.asp.
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientic, declares that this Walk Around
the World Pedometer (Model: PE988) is in compliance with
EMC directive 2004/108/EC. A copy of the signed and dated
Declaration of Conformity is available on request via our
Oregon Scientic Customer Service.