Filter
Top Products
11
19. Wrap the Butterfly Cable (53) over a “V”-pulley
(46). Attach the “V”-pulley and a Long Cable Trap
(88) to the Center Upright (3) with an M10 x
58mm Button Bolt (75).
Make sure the Cable
T
rap is oriented to hold the Cable in the
groove of the Pulley.
21. Locate the Base Cable (57). Attach the eyelet of
the Cable to the Base (1) with an M10 x 192mm
Button Bolt (64) and an M10 Nylon Locknut (62).
22. Wrap the Base Cable (57) over a 3 1/2” Pulley
(45). Attach the Pulley to the Double “U”-bracket
(21) with an M10 x 48mm Button Bolt (74) and an
M10 Nylon Locknut (62).
23.
Wrap the Base Cable (57) under a 3 1/2” Pulley
(45).
Attach the Pulley to the Base (1) with an
M10 x 192mm Button Bolt (64) and an M10 Nylon
Locknut (62).
20. Attach the Butterfly Cable (53) to the Right
Butterfly Arm (8) with an M8 x 45mm Shoulder
Bolt (81), an M8 Washer (94), and an M8 Nylon
Locknut (82).
19
75
20
81
53
8
82
94
21
22
23
62
64
1
62
21
74
45
45
57
57
62
64
57
88
3
53
46
1