Filter
Top Products
SM63 Unpacking & Assembly Instructions
16
Bolt the cable to the weight stacks as shown in Figure 20. Thread the 7/8” nut up on the cable
bolt as shown at left. Screw the bolt down into the weight stack as shown at right. Tighten the
bolt with a 7/8” combination wrench.
Figure 20. Screw the cable into the weight stack.
TRICEP PUSHDOWN CABLE ROUTING
Route the tricep pushdown cable as shown in Figure 21. Screw the cable into the weight stack
as shown previously in Figure 20.
Figure 21. Tricep pushdown cable routing.