Filter
Top Products
SM21 Unpacking & Assembly Instructions
8
HARDWARE
Hardware Figure 1. Assembly Parts.
The parts shown in Hardware Figure 1 are used to assemble the SM21. They are:
A. 7/16” x 6” hex head bolt (used to bolt connecting beam to the tops of the cells)
B. 7/16” flat washer
C. 7/16” cap washer (use on head end of the 6” bolt so end cap will fit on the nut)
D. 7/16” hex head nut
E. End caps (bolt covers)
PARTS LIST
Part # ID Description Quantity
Main components
1
2
1-stack cell
Connecting beam
2
1
0017-00101-1561
0017-00104-0363
0017-00104-0366
0017-00103-0233
0017-00042-0969
6” bolt hardware
A
B
C
D
E
7/16” x 6” hex head bolt
7/16” flat washer
7/16” cap washer
7/16” Nyloc nut
End caps
4
4
4
4
4
Handle and bar
hardware
Safety carabiner
Crossover handle
Leg strap
2
2
1
Hardware Kit: SK50-S0080-0000