Filter
Top Products
6.3 TROUBLESHOOTING THE TELEMETRY HEART RATE CHEST STRAP
HEART RATE READING IS ERRATIC OR ABSENT ENTIRELY
Repeat the electrode moistening procedure on the chest strap. See Section 3.2, titled Heart Rate Monitoring for
details. The electrodes must remain wet to pick up and transmit accurate heart rate readings.
Make sure the electrodes are flat against the skin.
Wash the belt transmitter regularly with mild soap and water.
Make sure the chest strap transmitter is within three feet (91 centimeters) of the heart rate receiver.
The chest strap is battery-operated and will stop functioning when the battery runs out. Contact Customer
Support Services for instructions on how to have the chest strap replaced. See Section 6.4, titled How to Obtain
Product Service.
HEART RATE READING IS ERRATIC OR EXTREMELY HIGH
If the chest strap is worn near sources of electromagnetic signals, these signals may be strong enough to elevate heart
rate readings. Possible sources include:
Television sets and/or antennas, cell phones, computers, cars, high voltage power lines and motor driven exer-
cise equipment.
Another heart rate transmitter within three feet, or one meter, may also cause abnormal heart rate readings.
6.4 TROUBLESHOOTING THE HANDPULSE SENSORS
If the heart rate reading is erratic or missing, do the following:
Dry moist hands to prevent slipping.
Apply hands to both sensors, one in each hand.
Grasp the sensors firmly.
Apply constant pressure around the sensors.
28