Filter
Top Products
M051-00K63-A087
Life Fitness Models 95CXL Exercise Bike Unpacking Instructions
UNPACKING INSTRUCTIONS
Tools Required: T-45 Torx Wrench
1. Remove the four straps from the corrugated shipping container and remove the TOP TRAY (A).
2. Remove the DISPLAY CONSOLE BOX (B) and set aside. Lift and remove the two REAR SUPPORT POSTS (C).
3. Lift and remove the two FRONT SUPPORT POSTS (D). Carefully lift and remove the SHIPPING SLEEVE (E).
4. Remove the SHIP KIT (F) and set it aside.
5. Carefully remove all protective plastic wrapping.
6. Locate the four 3/8-16 x 3/4” BUTTON HEAD SCREWS (G) from the hardware bag located in the SHIP KIT (F).
7. Remove the ACCESSORY TRAY (J) from the TOP CENTER
PACKAGING SUPPORT (K). Remove the TOP CENTER
PACKAGING SUPPORT.
8. The CONSOLE SUPPORT (L) is shipped within the LOWER
CENTER PACKAGING SUPPORT (M). Carefully lift CONSOLE
SUPPORT upward and remove the LOWER CENTER
PACKAGING SUPPORT.
CAUTION: BE CAREFUL NOT TO DAMAGE THE
WIRE HARNESS (N) WHEN HANDLING THE
CONSOLE SUPPORT (L).
9. Pivot the CONSOLE SUPPORT (L)
upward. Align and insert the
CONSOLE SUPPORT MOUNTING
FLANGE (O) into the top of the
MONOCOLUMN (P). Secure the
CONSOLE SUPPORT to the
MONOCOLUMN using the four 3/8-16
x 3/4” BUTTON HEAD SCREWS (G).
Tighten the screws to 15-20 ft. lbs.
CAUTION: BE CAREFUL
NOT TO DAMAGE THE WIRE
HARNESS (N) WHEN
ATTACHING THE CONSOLE
SUPPORT (L) TO THE
MONOCOLUMN (P).
10. Carefully lift the exercise bike from the
BOTTOM TRAY (Q).
11. Follow the Assembly Instructions included in the parts bag to
complete the assembly of your exercise bike.
IMPORTANT
SAVE YOUR PACKING MATERIALS IN CASE OF RETURN
Ship Kit (F) Contents:
! Handlebars
! Parts Bag
! Assembly Instructions
! Operation Manual
! Top and Bottom Polar Covers
! Seat Post Covers
L
P
N
G
O
A
E
B
C
F
Q
D
J
K
M