Filter
Top Products
16
STEP 7:
Remove one QUICK CONNECT from the end of one LOWER (SHORT) CABLE (30).
Insert the end (where the QUICK CONNECT was removed) of the the LOWER (SHORT) CABLE (30) through the
LOWER RIGHT PULLEY (J) and through the access hole in the FOOTPLATE (7). Continue routing the cable as
shown ending at the RIGHT MID PULLEY ASSEMBLY (K). Reattach the previously removed QUICK CONNECT to
the end of the LOWER (SHORT) CABLE (30).
NOTE: THE CABLE MUST BE INSERTED BETWEEN THE PULLEY AND THE PULLEY GUIDE (L) AND MOVE
FREELY.
Repeat the routing on the left side of the unit using the remaining LOWER (SHORT) CABLE (30).
30
K
J
L
30
7