Landice 8700 Treadmill User Manual


 
23
LED LIGHTS ON PWM
The PWM lower board is designed with two diagnostic LED lights. The LED’s are color coded
according to their specific function.
LED 1 (red) – This indicates a high current draw similar to the C.LIM LED on our SCR lower control
board. LED 1 will only light if there is high current being used due to a possible worn out treadbelt and
deck system or it can also light if the IR pot is out of adjustment. The IR pot controls how the PWM
board reacts to varying loads (users’ weights). If the IR pot is out of adjustment you will notice the
treadbelt will surge and the red LED 1 will flash in unison with the belt surge.
LED 2 (green) – This indicates proper line voltage is being supplied to the PWM board. This line
voltage is delivered to the PWM via the belt relay located on the relay board. When the belt relay
energizes 110VAC or 220VAC is sent to the input terminals (L1 & L2) on the PWM board and LED 1
illuminates.