Filter
Top Products
ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Z
STEP 2
Attach Base Frame for Weight (9) to Base Frame (3) using:
1 x (41) Square Plate 2 x (78) Bolt
4 x (73) Washer 2 x (82) Nylon Nut
Screw Bolt (91) and Washer (92) into rear of Base Frame for Weight (9).
Slide Guide Rods (14) down into Base Frame for Weight (4) and slide on
the following:
2 x (40) Weight Stack Bumper 5 x (17) 15 lb plate
9 x (16) 10 lb plate 5 x (18) 5 lb plate
1 x (19) Top Plate 1 x (8) Top Guide Rod Frame
Secure Guide Rods (14) to Top Guide Rod Frame (8) then connect to
Main Top Frame using:
2 x (74) Bolt 2 x (72) Big Washer
1 x (31) Plate 2 x (78) Bolt
4 x (73) Washer 2 x (82) Nylon Nut
NOTE: The weight
stack assembly can be
connected to eigher side
of the machine.