Filter
Top Products
Transfer Files to PC
Transfer logs from the LogMan II to the LogView PC as follows. Note that
logs are automatically deleted from the LogMan II after transfer to the PC.
Step Action
1 Place the LogMan II in the docking station and verify that the
USB cable is connected to the docking station and the PC.
2 Start LogView.
3
Select the drive where you store log files from the Select
Archive Drive dropdown list on the left side of the LogView
window.
4 Open (double-click) the folder in which to save the log files in
the Select Archive Path list box.
5
Select Retrieve > Psion Link from the LogView menu. The
Psion Link dialog opens.
6
Select LOGMAN II from the DEVICE dropdown list in the Psion
Link dialog.
7
Select Copy Logs - PC< - from the Command dropdown list.
Click Execute.
8
When the STATUS line reads Copy Finished, click Close.
For More Information
For more information, please see the LogMan II User Manual included on
the CD-ROM. To contact Johnson Controls about this product, please visit
our website at www.myrefcon.com.
Getting Started
LogMan II
Revision 1.0
Description
The LogMan II is a
portable device for
the retrieval and transfer to PC
of
refriger- ated container data
for cargo
handling
verification and
documentation.
The LogMan II is fully supported by the
LogView application and works with
all
major reefer controllers.
The unit is simple to use and
ruggedly
built to withstand the hard
environment
of container terminals and shipboard
transport.
In addition to log retrieval, the LogMan
II allows the user to:
• Set controller date and time
• Set container (or genset) ID
• Set container trip start date
• Store load and discharge ports
• Enter temperature probe correction
values
• Store a container comment
• Calibrate temperature probes
• Update controller firmware
• View genset fuel level, set tank size
and low-fuel warning level