Filter
Top Products
STEP 2 (See Diagram 2)
A.) Attach the Leg Developer Holder (#5) to the Front Stabilizer (#6). Secure it with
three M10 x 5/8” Allen Bolts (#43) and ∅ ¾” Washers (#45).
B.) Attach the Leg Developer Holder (#5) to the front of Main Seat Support (#3).
Secure it with one M10 x 2 ½” Carriage Bolt (#56), two M10 x 2 ¾” Carriage Bolts
(#39), three ∅ ¾” Washers (#45), and three M10 Aircraft Nuts (#44).
C.) Attach the back of Main Seat Support (#3) to the Cross Brace (#2). Secure it with
one Bracket (#20), two M10 x 2 ¾” Carriage Bolts (#39), ∅ ¾” Washers (#45),
and M10 Aircraft Nuts (#44).
D.) Insert one Lock Knob (#23) into the hole on the back of Leg Developer Holder.
DIAGRAM 2
5