Filter
Top Products
STEP 2 (See Diagram 2)
A.) Attach the Right Vertical Beam (#21) to the Right Base Frame (#46). Secure it with two M10 x
2 ¾” Carriage Bolts (#17), ∅ ¾” Washers (#6), and M10 Aircraft Nuts (#5).
B.) Attach the Right Seat Support (#49) to the Right Vertical Beam (#21). Secure it with one
Bracket (#7), two M10 x 2 ¾” Carriage Bolts (#17), ∅ ¾” Washers (#6), and M10 Aircraft Nuts
(#5).
C.) Attach the other end of Right Seat Support (#49) to the Right Base Frame (#46). Secure it with
one M10 x 2 ¾” Carriage Bolt (#17), ∅ ¾” Washer (#6), and M10 Aircraft Nut (#5).
D.) Attach the Leg Developer (#40) to the front open bracket on the Right Seat Support. Secure it
with a Leg Developer Axle (#41), two ∅ ¾” Washers (#6), and M10 x ¾” Allen Bolts (#37).
DIAGRAM 2
5