Horizon Fitness ELITE 2.0B Home Gym User Manual


 
KNOW YOUR UPRIGHT BIKE
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our bikes so lubrication is not needed. The most important main-
tenance step is to simply wipe your perspiration off the bike after each use.
HOW DO I CLEAN MY HORIZON FITNESS UPRIGHT BIKE?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your Horizon Fitness upright bike and its operating environment will keep maintenance
problems and service calls to a minimum. For this reason, Horizon Fitness recommends that the fol-
lowing preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
Turn off the upright bike with the on/off switch, and unplug the power cord from the wall outlet.
(3.0B only)
WARNING!
To remove power from the upright bike, the power cord must be disconnected from the wall outlet.
(Elite 3.0B only)
Wipe down the upright bike with a damp cloth. Never use solvents, as they can cause damage to
the upright bike.
Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
Make sure the power cord is not underneath the upright bike or in any other area where it can
become pinched or cut.
EVERY WEEK
Clean underneath the upright bike, following these steps:
Turn off the upright bike with the on/off switch. (Elite 3.0B only)
Then unplug the power cord at the wall outlet. (Elite 3.0B only)
Move the upright bike to a remote location.
Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
upright bike.
Return the upright bike to its previous position.
EVERY MONTH
Inspect all assembly bolts and pedals on the machine for proper tightness.
ROUTINE MAINTENANCE
PEDALS
CONSOLE
CONSOLE MAST
TENSION
KNOB
FRONT
FOOT
TUBE
ADJUSTABLE SEAT
LEVER
SEAT
TRANSPORT
WHEEL
REAR SUPPORT
TUBE
SIDE COVERS
GRIP PULSE
HANDLEBARS
WARNING
9 ELITE 2.0B 26 ELITE SERIES
elite upright bike owner’s guidev1.1.qxd 10/13/2003 12:54 PM Page 10