Honeywell T8024D Thermostat User Manual


 
PRODUCT DATA
® U.S. Registered Trademark
Copyright © 2001 Honeywell • • All Rights Reserved
T8000C, T8001C,T8024D
Programmable Thermostats
APPLICATION
The T8000C, T8001C and T8024D Programmable
Thermostats provide programmable temperature control for
24 Vac heating-cooling systems with manual changeover
from heat to cool. The T8000C and T001C provide single-
stage heating and cooling control and the T8024D provides
two-stage heating and two-stage cooling contorl. Heating
cycle rates are selectable at 1, 3, 4, 5, 6, 9, or 12 cph.
Cooling cycle rates are fixed at 3 cph. Temperature indication
can be set for °F or °C.
The T8000C is powered through the heating/cooling system
controls. The T8001C and T8024D are powered directly
through the system transformer.
FEATURES
Attractive styling complements any decor to the
homeowner s delight.
Preprogrammed for your convenience.
Program up to four time periods and temperature
setpoints to complement your lifestyle.
Programs are permanently held in non-volatile memory
in the event of a power failure.
Indefinite setpoint temperature hold for added comfort
and energy savings.
Ease-of-use means fewer homeowner questions and
increased homeowner satisfaction.
Large temperature display for quick easy readability.
Conveniently sized thermostat (5-1/2 x 3-1/2) with
optional decorator cover plates (7-3/8 x 5-3/4) make it
easy to install in a variety of locations.
Keys are located by the display for easy access.
FAN and SYSTEM switches are located on the lower
edge to eliminate accidental setting changes.
Easy installation, setup and self-test saves time and
increases installer productivity.
Manual changeover from heat to cool eliminates
unexpected system operation.
°F or °C temperature display for added model flexibility.
Selectable heating cycle rate (1, 3, 4, 5, 6, 9 or 12 cph) for
a variety of applications which reduces the amount of
inventory.
Cooling cycle rate is fixed (3 cph), the standard setting
for compressors, for speedy installation.
Setpoints are permanently held in non-volatile memory
(no batteries required) and retained during power
outages for increased installer and homeowner
convenience.
Power stealing and hardwired models available for
virtually all equipment and application needs including;
gas, oil and electric forced air, condensing gas furnaces,
forced air zoning systems, single stage heat pumps,
hydronic heat, gravity and radiant floor heat systems.
Contents
Application .......................................................................... 1
Features .............................................................................. 1
Specifications ...................................................................... 2
Ordering Information ........................................................... 2
Installation ........................................................................... 3
Installer Setup ..................................................................... 6
Operation ............................................................................ 8
Checkout ............................................................................. 9
Troubleshooting .................................................................. 12
68-0195-2