Filter
Top Products
13
3.3 Removing and Attaching Base
3.4 Adjusting Handle
To remove infant restraint, squeeze handle at
back of seat and lift infant restraint from base
as shown
➊
.
To put infant restraint in base, push infant
restraint down until it clicks into base. Pull
up on infant restraint to be sure it is
latched firmly into base.
➊
1. Press handle adjustment buttons on
both sides of handle
➋.
2. Rotate handle until it clicks into any
of three positions (for carrying,
reclining, or sitting). BOTH handle
adjustment buttons must pop out
to lock handle in place
➌.
3. Push and pull on the handle to be
sure it is locked firmly in position.
➋
➌
Carrying
Reclining
Sitting