Filter
Top Products
Ages: 6+
Players: 2–4
Contents:
• Game board and assembly pieces
• 3 blue beanbags / 3 red beanbags
• Instructions
Bagball
Object: Try and be the first player to reach 300 points
by landing your beanbags in the various nets.
Setup: Position the Bagball side of the cloth facing
toward you (as shown to the right). Move the
scoring markers on the arch to zero. The score
marker on the side is not used in this game.
Game Play: Bagball may be played with
either 2 or 4 players divided into 2 teams.
Teams pick a color of bags to use throughout
the game and position themselves 10 - 15
feet away from the game board.
The game consists of rounds. During each
round, players take turns tossing their bags
at the game board (If playing with 4 players,
teams alternate their players each round).
If the bag successfully lands into the net the player scores the value
marked. A round is not finished until all 6 bags have been tossed.
At the end of the round, scores are totaled and players move the scoring
markers on the game board to reflect their total score. The first player to
reach 300 points is the winner. In the event of a tie, players toss one
additional bag. The player who scores the highest number of points on
that toss is the winner. If there continues to be a tie, continue tossing one
bag until a winner is determined.
Advanced Play: For a more competitive game, players may cancel each
other’s bags during the round. Teams only score the difference between
the highest and lowest score for the round. Example, Player one lands 50
points worth of bags and player two lands 40 points. Player one then
scores 10 for the round (50 – 40 = 10). [REMEMBER–Only one team can
score per round in Advanced Play!]
Big League Bagball
Object: Score the most runs in 9 innings
by landing beanbags in the various nets to
score runs.
Setup: Position the Big League Bagball side
of the cloth facing toward you (as shown to
the right). Move the scoring markers to zero
and the inning marker to one. Decide who is
going first. They are the batter and will use
the 4 square bags. The fielder will get the 2
round bean bags.
Game Play: Big League Bagball may be
played with either 2 or 4 players divided into 2
teams. Players position themselves 10 - 15 feet away from the game
board.
The game consists of innings. During an inning, each player gets to be on
offense (as a batter) and defense (as a fielder). The batter begins and
tosses
one of the four square bags at the game board. If a bag successfully
lands
in a net a hit is awarded and base runners move/advance based on
the following:
• Single Net = 1 runner on first base.
• Double Net = 1 runner on second base.
• Triple Net = 1 runner on third base.
• Home Run Net = 1 run scored plus 1 run for any runners on base.
Runners advance bases when the batter lands a hit. The number of bases
advanced is equal to the number of bases the hitter receives. For example,
a batter has a runner on second base and then lands a bag for a single on
his next throw. The runner on second advances to third and the hitter has
a new base runner on first base. A bag that lands in a net marked “out,” or
misses the game board completely is an out against the batter. The batter
throws one bag after another until he either runs out of bags to throw or
receives 3 outs.
The opponent (fielder) takes the two round bags and can try to cancel out
any of the plays that happen on offense. After any throw, EXCEPT a home
run, the fielder may step in to cancel out the batter’s hit. To do this the
fielder must throw a bag successfully into one of the “out” nets. If the
fielder is successful, the batter’s play is canceled and an out is given to
the batter. No runners advance. For example, the batter has a runner on
second base and then lands a bag for a single on his next throw. The
fielder steps in and throws a bag for an out. That “single” base runner’s
play has been cancelled and the batter now has an OUT ( The runner on
second does not advance to third).
After a batter receives 3 outs or throws all 4 of their bags, the offense and
defense switch and repeat the previous steps. When both players have
had a chance at offense and defense, the inning is over and a new one
begins. After each inning, move the “inning marker” on the right side to
the next inning until all nine have been played.After nine innings the game
©2005 Fundex Games, Ltd. • P.O. Box 421309 • Indianapolis, IN 46242
MADE IN CHINA
Questions or comments? Write to us at the address above, call 1.800.486.9787
or email customerservice@fundexgames.com • www.fundexgames.com
In an effort to continually improve our products, items may vary from those shown.
Item No. 0726–00–11
IMPORTANT: To change games, flip the game board
over and rotate the legs to the opposite side.
Step 3: Insert 2 (2) side connectors into the openings on
the side pockets connecting them to the (A) tubes.
(2) (2)
(1)
Step 5: Connect 1 (3) corner connector to the (B) tube.
Slide 1 (C) tube into the lower pocket on the game board
until it connects firmly to the (3) corner connector.
Step 4:
Insert 2 (B) tubes into the side pockets on the
game
board. Fit the tubes onto the (2) side connectors.
(4)
(4)
(3)
(B)
(C)
Step 2: Rotate, or bend out slightly, the 2 (A) tubes that
were just inserted and place the (1) center connector into
one of the open ends. Rotate the 2 (A) tubes back together
making sure the center connector fits tightly inside the tubes.
[Note: This is a very tight fit. Please bend carefully.]
Step 6: Insert 1 (3) corner connector to the open end of the
(C) tube. Rotate, or bend out slightly, the (3) connector
that was just inserted. Line it up with the open end in the
(B) side tube and press firmly until the pieces connect.
[Note: This is a very tight fit. Please bend carefully.]
(2)
Step 7:
Insert 2 (D) tubes onto the open stems of the
2 (2)
side connectors already on the game board.
Insert 2 (4) feet into the open ends of the (D) tubes.
Step 8:
Snap the 3 (5) scoring markers onto the game
board as shown above. Place in the locations shown.
(5)
(5)
(5)
Assembly:
Included in the box are the following pieces:
[The number or letter inside the () is how the
pieces will be referred to in the instructions.]
•
1 game board
•
2 curved tubes (A)
•
2 tubes 14.25” long (B)
•
1 tube 19.75“ long (C)
•
2 tubes 18” long (D)
•
1 center connector (1)
•
2 side connectors (2)
•
2 corner connectors (3)
•
2 feet (4)
•
3 scoring markers (5)
(D)
(D)
(A)
(A)
Step 1: Insert 2 (A) tubes into the opening on the top
pockets of the game board.
(3)