Freestyle FS80982 Heart Rate Monitor User Manual


 
TRIM
BELLA
Model FS80982
Model FS80983
Model FS80984
FEATURES:
100 meters H2O
Day/date
• EL backlight
10 lap memory chronograph
Countdown timer
• Alarm
Dual time
CONTROL BUTTONS
S1 – Start/lap Button
S2 – Stop/reset Button
S3 – Mode Button
S4 – Light Button
S2S3
S1S4
DISPLAY MODES
The watch has five display modes:
NORMAL TIME (TIME),
CHRONOGRAPH (Chro), RECALL
(RCL), ALARM (AL) and TIMER (TMR).
The change from one display mode to
another, press S3 button once.
TO SET THE TIME AND
CALENDAR
1. Press S3 button to select NORMAL
TIME mode.
2. Press S1 button to toggle between
NORMAL TIME mode and TIME 2
mode to set.
3. Press and hold S2 button for around
2 seconds, the second digits will
blink.
4. Press S1 button to reset the second
digits to 00.
5. Press S3 button once, the hour
digits will blink.
6. Press S1 to set the hour digits.
Holding down the button will speed
up the process.
7. Press S3 button once, the minute
digits will blink.
8. Press S1 button to set the minutes
digits.
9. Follow the same pattern to set the
day (of the week), year, month, date
and hour format.
10.To set the hour format, press S1
button to toggle between 12-hour
and 24-hour format. The P.M.
indicator may be displayed to
indicate the time period 12:00 A.M.
– 11:59 P.M. in 12-hour format.
11.After finish making all the settings,
press S2 button to confirm.
NOTE: The chosen hour format will
apply to both NORMAL TIME mode and
TIME 2 mode.
NOTE: In TIME 2 settings, only hours,
minutes, day, year, month and date
are open to setting.
TO USE THE CHRONOGRAPH
(STOP WATCH)
1. Press S3 button to select
CHRONOGRAPH mode.
2. The chronograph will then be
displayed in its current state – reset,
running, or stopped.
3. To resume a counting, press S1
button to resume from where it left
off.
4. To start a new counting, reset the
chronograph to zero first.
Press S1 button to stop counting,
then press S2 button to reset
counter to zero.
For changing the chronograph display
format:
In CHRONOGRAPH mode,
1. Press S2 button to toggle between
SPLIT format and LAP format.
2. If SPLIT format is selected, the split
time (cumulative lap time) will be
displayed.
If LAP format is selected, the lap
time (individual lap time) will be
displayed.
For the measurement of elapsed time:
In CHRONOGRAPH mode,
1. Press S1 button to start counting.
2. To stop counting, press S2 button.
Press S1 button to resume from
where if left off.
3. To reset to zero, press S2 button to
stop counting, then press S2 button
again to reset the counter to zero.
For the measurement of split time:
In CHRONOGRAPH mode,
1. Press S1 button to start counting.
2. While the chronograph is running,
press S1 button once to register a
lap.
3. Depends on the chronograph
display format selected, the
cumulative lap time (if SPLIT format
is selected) or the individual lap
time of the previous lap (if LAP
format is selected) will be displayed.
After around 5 seconds, the
currently accumulated time will be
displayed.
4. Repeat the last step until all the
laps have been registered.
5. To stop counting, press S2 button.
Press S1 button to resume from
where if left off.
6. To reset to zero, press S2 button to
stop counting, then press S2 button
again to reset the counter to zero.
TO USE THE RECALL FUNCTION
1. Press S3 button to select RECALL
mode. The lap record of the previous
chronograph counting will be
displayed.
2. Press S1 button to cycle the first
nine to the last split/lap record.
3. Press S2 button to return to
CHRONOGRAPH mode.
NOTE: The lap record will be cleared
when chronograph is reset.
TO SET THE ALARM TIME
1. Press S3 button to select ALARM
mode.
2. Press S2 button toggle between
HOME ALARM (HOME) and TIME 2
ALARM (T2) to set.
3. Press and hold S2 button for around
2 seconds, the hour digits will blink.
4. Press S1 button to set the hour
digits. Holding down the button will
speed up the process.
5. Press S3 button once, the minute
digits will blink.
6. Press S1 button to set the minute
digits.
7. After finishing making all the
settings, press S2 button to confirm.
NOTE: The alarm will automatically
be activated after being set.
TO TURN ON/OFF THE ALARM
AND HOURLY CHIME
In ALARM mode,
1. Press S2 button toggle between
HOME ALARM and TIME 2 ALARM
to set.
2. Press S1 button once to activate the
hourly chime. Chime indicator
will appear.
3. Press again to activate the alarm.
Alarm indicator
will appear.
4. Press the third time to activate both
functions. Both of the indicators will
appear.
5. Press the fourth time to deactivate
both functions. Both of the
indicators will disappear.
WHEN AN ALARM OR HOURLY
CHIME GOES OFF
A beep will be emitted by the hour if
the hourly chime is activated.
An 20-second alarm tune will be
emitted at the designated time when
the alarm is activated. To stop the tune,
press any button.
TO SET THE TIMER
1. Press S3 button to select TIMER
mode.
2. Press and hold S2 button for around
2 seconds, the hour digits will blink.
3. Press S1 button to set the hour
digits. Holding down the button will
speed up the process.
4. Press S3 button, the minute digits
will blink.
5. Press S1 button to set the minute
digits.
6. Press S3 button, the second digits
will blink.
7. Press S1 button to set the second
digits.
8. After finish making all the settings,
press S2 button to confirm.
TO USE THE TIMER
In TIMER mode,
1. Press S1 button to start counting.
2. To stop counting, press S2 button.
Press S1 button to resume from
where it left off.
3. To reload the timer, press S2 button
to stop counting, and then press S2
button again.
4. After reaching zero in a countdown,
a tune will be emitted. To stop the
tune, press any button.
TO USE THE BACKLIGHT
Press S4 button to turn on the
backlight for 3-5 seconds.
OTHERS
In any setting procedure, if there is no
key manipulation for around 1-2
minutes, the watch will automatically
save the entered data and exit the
setting procedure.
FOLLOW THESE 8 TIPS TO GET THE
MOST OUT OF YOUR NEW WATCH!
8. It is advisable to have your watch
pressure tested annually and to
re-furbish your watch every 2-3
years to extend the life of the watch.
1. Never pull out the crown or operate
the pushers/buttons under water.
3. If your watch is exposed to
saltwater it is very important to
wash it thoroughly under tap water
and wipe dry with a soft cloth.
Keep it clean!
7. Never try to remove the caseback,
leave this to a certified watch repair
technician or Freestyle service
center. This will help in preventing
water leakage from improper
battery replacement.
4. Severe impacts or drops may
affect your watches water
resistance and performance.
6. Avoid exposing your watch to
chemicals, soaps or solvents as
they deteriorate the water resist
seals in your watch.
2. Make sure your crown is returned
to the original position before you
expose your watch to water.
5. Avoid exposing your Freestyle
watch to extreme temperatures
such as in a hot shower, Jacuzzi,
sauna or hot tub. The combination
of extreme heat and water may
cause your watch to lose some of
its water resistance.
the product, including but not limited
responsibility. This warranty applies
LIMITED LIFETIME WARRANTY
Freestyle U.S.A. warrants, to the
original purchaser, that its watches
are free from defects in materials
and workmanship for the lifetime
of the watch (under normal use)
from date of original purchase.
The following are not covered under
warranty: battery, strap/bracelet/
band and crystal.
Accidental breakage or damage
due to normal wear or misuse of
to the mathematical accuracy of
the product, is not covered under
this warranty. Some states do not
allow limitations on how long an
implied warranty lasts, or the
exclusions of or limitations on
consequential damages, so the
above limitation may not apply to
you. This warranty gives you
specific legal rights, and you may
have other rights, which vary from
state to state.
Under this warranty FREESTYLE
will make any necessary repairs, if
applicable, at no cost to you the
consumer. Any repair needed that
is not under warranty will be at the
cost of you the consumer. Proof
of purchase and / or original receipt
it needed to validate your warranty.
Your warranty is voided by any
servicing out by a non-authorized
agent. Any other form of guarantee
to you by the retailer is his / her
to watches purchased in the United
States. For watches purchased
outside the United States, please
contact you authorized
FREESTYLE dealer for warranty
information.
WATER RESISTANCE
3 ATM / 50 METERS / 100 FEET /
30 METERS H2O
5 ATM / 50 METERS / 165 FEET /
50 METERS H2O
10 ATM / 100 METERS / 330 FEET /
100 METERS H2O
20 ATM / 200 METERS / 660 FEET /
200 METERS H2O
SUITABLE ATMOSPHERE
Suitable for washing hands and light splashing
Suitable for light swimming. E.g.: Bathing in a pool or low
tide waters, but not suitable for diving
Suitable for most water sorts. E.g.: Swimming,
surfing and snorkeling, but not suitable for deep water diving
Suitable for most water sports including deep water diving
WATER RESISTANCE GUIDE