Open as PDF
Main Body Pole, black, longest, thin
Vestibule Pole, grey, long, thin
Ridge Pole, black, short, thick
t Attach ridge pole to underside of rainﬂy with straps and insert
the tips of the ridge pole into the pockets on underside of rainﬂy.
(Fig. 6 & 7)
t Drape rainﬂy over tent. (Fig. 8)
t Connect the elastic loops with “S” hooks, (found at the rainﬂy
corners) to the rings found at the tent corners. (Fig. 9)
t Secure rainﬂy with straps located on the underside of rainﬂy.
t Attach and stake out guylines. (Fig. 8)
HINT: During setup, keep door zipped to keep proper tension
TENT SETUP INSTRUCTIONS
Connect Poles to Tent
t Insert one pin into one end of the pole. (Fig. 3 and 4)
t Go to opposite end of pole and carefully insert the pin into the
other pole end. (Fig. 4)
t Repeat for all poles.
Attach Tent to Body Poles
t Attach clips along the edges of tent to body poles. (Fig. 5)
t Make any adjustments to the tent stakes, if needed.
(continued on other side)
Layout & Positioning
of Tent and Poles
t Layout and position the tent with door facing desired
direction. (Fig. 1)
t Stake down tent corners ﬁrst through the stake rings. (Fig. 2)
t Keep the ﬂoor taut.
t Stake down the remainder of the stake rings.
t Assemble all poles by unfolding and interlocking the shock-
corded pole sections.
t Insert the body poles & vestibule pole into the pole sleeves.
Before you begin
t Read all instructions before set up.
t Select a level site clear of rocks, branches, and other hard or
sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
t Do not set up your tent under trees because of potential lightning
strikes or falling tree limbs in inclement weather.
t Secure with all stakes and guylines provided to prevent property
damage or personal injury.
t For best results in windy conditions, position narrow end of tent
into the wind.
t Enlist the help of at least one other person to assist you when it
is time to assemble the tent.
Description Qty. Pole