Filter
Top Products
Operation Guide 2673
1
MA0307-EA
About This Manual
• Button operations are indicated using the letters shown
in the illustration.
• This watch is equipped with two color LCD panels. For
the sake of simplicity, the screen shots in this manual
are shown using only one color.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
(Light)
Alarm Mode
Countdown Timer Mode Stopwatch Mode
Timekeeping Mode Animation Mode World Time Mode
Press
C.
DST indicator
Animation pattern
Timekeeping Mode time
(Hour : Minutes)
On/Preset message
function disabled (Off)
Message
General Guide
• Press C to change from mode to mode.
• In any mode, press L to illuminate the display.
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• Pressing D in the Timekeeping Mode cycles through available screen formats as
shown below.
Seconds
Hour : Minutes
PM indicator
Day of week
Month – Day
Month – Day
Screen (color)
Seconds Screen
(color)
Month – Day
Screen
Seconds Screen
Press
.
• When a color screen (seconds screen, month-day screen) is selected in the
Timekeeping Mode, the current time that appears at the bottom of the display in
other modes is also shown in color.
Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World Time Mode are linked.
Because of this, make sure you select a city code for your Home City (the city where
you normally use the watch) before you set the time and date.
To set the time and date
1.In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2.Press C to move the flashing in the sequence shown
below to select other settings.
Minutes
12/24-Hour
Format
Seconds City Code
Hour
Year
Message
DST
MonthDay
3. When the setting you want to change is flashing, use D and B to change it as
described below.
•
For full information on city codes, see the “City Code Table”.
• See “Daylight Saving Time (DST)” for details about DST setting.
• The preset message you select here appears in the Animation Mode. See
“
Using
Graphic Animations
”
for more information.
• See the list of preset messages for information about the preset messages that
are available.
4. Press A to exit the setting screen.
• With the 12-hour format, the P (PM) indicator appears on the display for times in the
range of noon to 11:59 p.m. and the A (AM) indicator appears for times in the range
of midnight to 11:59 a.m. The A and P indicators are not displayed with the current
time at the bottom of the display in other modes.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.
• The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
Screen
50
OFF
TYO
P
10:58
12H
2003
6-30
OFF
To do this:
Reset the seconds to
00
Toggle between Daylight Saving Time (
ON
)
and Standard Time (
OFF
)
Change the city code
Change the hour or minutes
Toggle between 12-hour (
12H
) and 24-hour
(
24H
) timekeeping
Change the year
Change the month or day
Change the message
Do this:
Press D.
Press D.
Use
D (east) and B (west).
Use
D (+) and B (–).
Press D.
Use
D (+) and B (–).
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard
Time. Remember that not all countries or even local areas use Daylight Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
1.In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2.Press C to display the DST setting screen.
3.Press D to toggle between Daylight Saving Time (
ON
)
and Standard Time (
OFF
).
4.Press A to exit the setting screen.
• The DST indicator appears on the display to indicate
that Daylight Saving Time is turned on.
Using Graphic Animations
In the Animation Mode, the current time is shown in the
lower part of the display, and a graphic animation is
displayed in the center of the display. You can specify one
of three different animation patterns.
You can also configure the Animation Mode so it
automatically displays the current time (as kept in the
Timekeeping Mode) for about three seconds whenever
you angle the watch towards your face for reading.
Animation Patterns
You can select any one of the following three animation
patterns for the Animation Mode.
• Animal (Dolphin → Dog → Cat)
• Baby-G (B → A → B → Y → G)
• Seconds count of current time
To select an animation pattern
1.Use C to enter the Animation Mode.
2.In the Animation Mode, each press of D cycles
through the animation patterns in the sequence shown
below.
Seconds
Baby-G
Animal
Preset Message Display
When the Animal animation pattern is selected, the watch will also display preset
message selected by you in the Timekeeping Mode at the timing shown below.
Dolphin Dog
Cat
Message
• Note that the preset message does not appear if you disable the preset message
function.
To select a preset message
1.Use C to enter the Timekeeping Mode.
2.In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
3.Press C nine times to advance to the preset message
selection screen.
4.Use D (+) and B (–) to scroll through the preset
messages until the one you want appears on the
display.
• To disable the preset message function, display
OFF
in step 4.