Casio ANA(3H3E-1) Watch User Manual


  Open as PDF
of 1
 
1
Operation Guide ANA(3H3E-1)
MA1101-EA
Your watch may differ somewhat from the one shown in the •
illustration.
Notes
Some water resistant models are equipped •
with a screw lock crown.
With such models, you must unscrew the •
crown in the direction noted in the illustration
to loosen it before you can pull it out. Do not
pull too forcibly on such crowns.
Also note that such watches are not water •
resistant while their crowns are loosened. Be
sure to screw the crowns back in as far as
they will go after making any setting.
Setting the Time and Day
To set the day
Pull the crown out to 1.
Click 1.
Rotate the crown to set 2.
the day.
Avoid changing the day
setting between 9:00 p.m.
and 1:00 a.m. (If you do,
the day indication may
not change at midnight).
Push the crown back in to 3.
the normal position.
To set the day of the
week and time
Pull the crown out to 1.
Click 2 when the second
hand is at 12 o’clock. The
second hand will stop.
Set the hands by rotating 2.
the crown. As you do, the
day of the week changes
accordingly.
After setting the day 3.
of the week, rotate the
crown to set the time.
Make sure to distinguish
between AM and PM.
On a time signal, push 4.
the crown back in to the
normal position.
24-Hour Hand
The 24-Hour Hand indicates
the current hour of the day.
It makes one complete
rotation every 24 hours.
Module 1343/2364/5071
Crown
(Normal position)
Click 1
(Day setting)
Click 2
(Time and
day of week
setting)
Day
24-Hour Hand
Day of the week
Module 1794/5072
Crown
(Normal position)
Click 1
(Day setting)
Click 2
(Time and
day of week
setting)
Day
24-Hour Hand
Day of the week
Module 5224
Crown
(Normal position)
Click 1
(Day setting)
Click 2
(Time and
day of week
setting)
Day of the week
Day
24-Hour Hand
For watch with the elapsed time bezel
■
Rotate the elapsed time bezel to align the
mark with the minute hand.
After certain amount of time elapsed, read the
graduation on the elapsed time bezel which the
minute hand points to.
The elapsed time is indicated.
Elapsed time bezel
Specifications
Module No.
Accuracy at normal
temperature
Battery type Battery life
1343 ±20 seconds per month SR916SW Approx. 3 years
1794/2364 ±20 seconds per month SR621SW Approx. 2 years
5071/5072 ±20 seconds per month SR621SW Approx. 3 years
5224 ±20 seconds per month SR920SW Approx. 3 years