Casio 3242 Watch User Manual


  Open as PDF
of 3
 
Operation Guide 3242
E-9
About the Backlight
About the Auto Light Switch Function
When the auto light switch function is turned on, the backlight automatically turns on
for two seconds under the conditions described below. Avoid wearing the watch on
the inside of your wrist. Doing so causes the auto light switch to operate when not
needed, which shortens battery life.
Moving the watch to a position that is parallel to the ground and then tilting it
towards you approximately 40 degrees causes the backlight to illuminate.
Parallel to ground
40°
E-8
After you set the time and date, press 5. A to return to the Timekeeping Mode.
E-7
While the seconds digits are selected (fl ashing), press 3. D to reset the seconds to
00. If you press D while the seconds count is in the range of 30 to 59, the seconds
are reset to 00 and 1 is added to the minutes. If the seconds count is in the range of
00 to 29, the minutes count is unchanged.
While any other digits (beside seconds) are selected (fl ashing), press 4. D to
increase the number or B to decrease it. While the 12/24-hour format setting is
selected, press D or B to toggle it between 12 and 24.
Except for when adjusting the seconds or setting the 12/24-hour format, holding x
down a button changes the current selection at high speed.
When the 12-hour format is selected, the indicator x P appears on the display to
indicate “P.M.” times. There is no indicator for “A.M.” times.
When the 24-hour format is selected, the indicator x 24 appears on the display.
The year can be set in the range of 2000 to 2099. x
The watch’s built-in full automatic calendar makes allowances for different month x
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
The day of the week is displayed automatically in accordance with the date (year, x
month, and day) settings.
E-6
Timekeeping Mode
To set the time and date
Hold down 1. A while in the Timekeeping Mode until the
seconds digits fl ash on the display because they are
selected.
Press 2. C to change the selection in the following
sequence.
Seconds
Hour Minutes
CC
C
C
Day
Month Year
C
C
C
12/24-Hour Format
Day of week
PM
indicator
Hour : Minutes Seconds
Month – Day
E-5
This watch returns to the Timekeeping Mode whenever you hold down the x C button
for one or two seconds. If you ever lose track of what mode you are in or what you
should do next, hold down C to return to regular timekeeping.
In any mode press x L to illuminate the display.
CC
C
Stopwatch Mode Alarm Mode Dual Time Mode
E-4
General Guide
Press x C to change from mode to mode.
After you perform an operation in any mode, pressing x C returns to the Timekeeping
Mode.
If you do not press any button for a few minutes while making settings in any mode x
(indicated when settings are fl ashing), the watch automatically clears the setting screen
(settings stop fl ashing) and returns to the normal display for the mode you are in.
C
Timekeeping Mode Countdown Alarm
Mode
C
E-3
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date .........................................................................................E-6
To switch the auto light switch function on and off ...........................................E-11
To set the countdown start time ..........................................................................E-14
To use the countdown alarm ................................................................................E-15
To switch auto repeat timing and the progress beeper on and off ..................E-16
To turn the Auto-Start function on and off ..........................................................E-19
To set the Target Time and to turn it on and off .................................................E-20
To set the alarm time .............................................................................................E-22
To turn the daily alarm and hourly time signal on and off ................................E-23
To test the alarm sound ........................................................................................E-24
To set the Dual Time .............................................................................................E-25
E-2
Contents
General Guide ..........................................................................................................E-4
Timekeeping Mode ..................................................................................................E-6
About the Backlight .................................................................................................E-9
Countdown Alarm Mode .......................................................................................E-14
Stopwatch Mode ....................................................................................................E-17
Alarm Mode ............................................................................................................E-22
Dual Time Mode .....................................................................................................E-25
Specifi cations ........................................................................................................E-27
E-1
About This Manual
Note that the product illustrations in this manual are intended for reference only, x
and so the actual product may appear somewhat different than depicted by an
illustration.
MA1110-EA
next