Filter
Top Products
Operation Guide COMBIWVGE1
1
MO0612-EA
About This Manual
• The operational procedures for Modules 2734, 2758, 3748, 3749, 4773, and 4774
are identical. All of the illustrations in this manual show Modules 2734 and 2758.
• Button operations are indicated using the letters shown in the illustration.
Modules 2734 and 2758 Modules 3748 and 3749 Modules 4773 and 4774
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
General Guide
• Press C to change from mode to mode.
• In any mode, press B to illuminate the display.
Timekeeping Mode
Press C.
▲
▲
▲
▲
▲
▲
World Time Mode
Alarm Mode
Date Alert Mode
Time Recorder Mode
Stopwatch Mode
Hand Setting Mode
▲
Radio-controlled Timekeeping
This watch receives a time calibration signal and update
its time setting accordingly. The time calibration signal
includes both Standard Time and Daylight Saving Time
(summer time) data.
• This watch is designed to pick up the time calibration
signal transmitted from Rugby, England and the signal
from Mainflingen, Germany.
Current Time Setting
This watch automatically adjusts its digital time setting in
accordance with a time calibration signal. You can also
perform a manual procedure to set the time and date,
when necessary.
• The first thing you should do after purchasing this watch
is to set your Home City, which is the city where you will
normally use the watch. For more information, see “To
set your Home City” below.
Month – Day
Day of week
Minute hand
Hour hand
• When using the watch that is outside of the range of the transmitters in Rugby and
Mainflingen, you need to manually adjust the time as required. See “Timekeeping”
for information about manual settings.
• The analog time of this watch is synchronized with the digital time. Because of this,
the analog time setting is automatically adjusted whenever you change the digital
setting. See “Analog Timekeeping” for more information.
To set your Home City
1. In the Timekeeping Mode, hold down A until the
transmitter indicator (
A/T, MSF, or
DCF) starts to
flash, which indicates the setting screen.
• If the displayed transmitter indicator shows something
other than
A/T, use D to display A/T before
advancing to the next step.
2.Press C to display the city code setting screen.
3. Use D (east) and B (west) to select the city code you
want to use as your Home City.
City code
• The following are the city codes for major cities in the Western Europe time
zones.
LON: London
PAR and BER: Paris, Berlin, Milan, Rome, Amsterdam, Hamburg, Frankfurt,
Vienna, Barcelona, Madrid
4. Press A twice to exit the setting screen.
• The first press of A displays the 12/24-hour setting screen. Pressing A again exits
the setting screen.
Important!
• Normally, your watch should show the correct time as soon as you select your Home
City code. If it does not, it should adjust automatically after the next auto receive
operation (in the middle of the night). You can also perform manual receive or you
can set the time manually.
• If you are in an area that does not use Daylight Saving Time (summer time), turn off
the DST setting.
• See “Transmitters” for details about the transmitter indicator.
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
• Auto Receive
With auto receive, the watch automatically picks up the time calibration signal five
times a day at 0:00 a.m., 1:00 a.m., 2:00 a.m., 3:00 a.m., and 4:00 a.m. For more
information, see “About Auto Receive”.
• Manual Receive
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see “To perform manual receive”.
Important!
• Position the watch as shown in the nearby illustration, with its 12 o’clock side facing
towards a window. Make sure there are no metal objects nearby.
Resin Band
Metal Band
• The watch should not be on its side or facing the wrong way.
• Proper signal reception can be difficult or even impossible under the conditions listed
below.
• Signal reception is normally better at night than during the day.
• Time calibration signal reception takes from two to five minutes, but in some cases it
can take as long as 12 minutes. Take care that you do not perform any button
operations or move the watch during this time.
Inside or
among
buildings
Inside a
vehicle
Near
household
appliances or
office
equipment,
or a mobile
phone
Near a
construction
site, airport, or
other sources
of electrical
noise
Near high-
tension
power lines
Among or
behind
mountains
• At distances further than about 500 kilometers from a transmitter, signal reception
may not be possible during certain times of year or times of day. Radio interference
may also cause problems with reception.
• Even when the watch is within the reception range of the transmitter, signal
reception is impossible if the signal is blocked by mountains or other geological
formations between the watch and signal source.
• Signal reception is affected by weather, atmospheric conditions, and seasonal
changes.
Rugby
Mainflingen
1,500 kilometers
500 kilometers
• See the information under “Signal Receive Troubleshooting” if you experience
problems with time calibration signal reception.