Casio 2313-1 Watch User Manual


  Open as PDF
of 2
 
2313-1
Module No. 2313
GENERAL GUIDE
• Press
BB
BB
B to change from mode to mode.
• Some models have a white-on-black display.
• The watch automatically reverts to the Timekeeping Mode if you do not perform any operation in the Data Bank Mode for a few minutes.
• Holding down
BB
BB
B for a few seconds in any mode returns to the Timekeeping Mode.
TIMEKEEPING MODE
The Home Time indicator appears on the display in the Timekeeping Mode.
Timekeeping Calendar
• Press
AA
AA
A to toggle the lower display between the time (hour, minutes, seconds) and
date (day of the week, month, day).
• Your Home Time city code momentarily appears on the display whenever you enter
the Timekeeping Mode from another mode.
• Pressing
CC
CC
C in the Timekeeping Mode displays your Home Time city code and home
time for about one second.
To set the time and date
1.While in the Timekeeping Mode, hold down
AA
AA
A until the city code flashes on the
display.
2.Press
BB
BB
B to move the selection (flashing) around the display in the following se-
quence.
City Code DST ON/OFF Seconds
YearMonth
Hour
Minutes
12/24-hour format
Day
3.While the seconds setting is selected (flashing), press
CC
CC
C to reset it to 00. If you
press
CC
CC
C while the seconds setting is in the range of 30 to 59, the seconds are reset
to 00 and 1 is added to the minutes. If the seconds setting is in the range of 00 to
29, the minutes count is unchanged.
• While the 12H/24H setting is flashing, press
CC
CC
C to toggle between 12-hour and 24-
hour timekeeping.
• While the DST ON/OFF setting is flashing, press
CC
CC
C to toggle daylight saving time
(summer time) on and off.
• While the city code is flashing, press
CC
CC
C to scroll through the available city codes to
select one as your Home Time city.
• While any other setting is selected (flashing), press
CC
CC
C to increase it.
• Holding down
CC
CC
C changes the setting at high speed.
4.After you set the time and date, press
AA
AA
A to return to the Timekeeping Mode.
• The day of the week is automatically set in accordance with the date.
• The date can be set within the range of January 1, 1995 to December 31, 2039.
• If you do not press any button for a few minutes while a setting is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
To set the hands
Pull the crown out. Set the hands by turning the crown in either direction. Push the
crown in on a time signal.
WORLD TIME MODE
The World Time Mode lets you view the current time in any one of 27 time zones (40
cities) around the world.
• You cannot change the time setting in the World Time Mode. The time setting you
make in the Timekeeping Mode is used to calculate the times in the World Time
zones. For daylight saving time (summer time), you must make separate settings
for the Timekeeping Mode and World Time Mode.
• The seconds count in the World Time Mode is synchronized with the count in the
Timekeeping Mode.
Event Reminder Mode
World Time Mode
Timekeeping Mode
Data Bank Mode
Stopwatch Mode
Press
AA
AA
A.
When you return to the Timekeeping Mode or World Time Mode, the display contents (timekeeping or calendar) are the same as what they were when you last exited the mode.
Press
AA
AA
A.
Crown
Analog display
Seconds
Hour : Minutes
PM indicator
Home time
indicator
Digital display
Day of week
Month - Day
City code
Hour : Minutes
Alternates at
1-second intervals.
Year
Data No.
Month - Day
Press
AA
AA
A.
Day of weekWorld time indicatorDST on indicator
Month - Day
• The 12-hour/24-hour format setting you make in the Timekeeping Mode is applied
to all the times in the World Time Mode.
• See the CITY CODE TABLE for information about city names and GMT differen-
tials.
City Code Search
In the World Time Mode, press
CC
CC
C to scroll through the available city codes. Holding
down
CC
CC
C scrolls at high speed.
• Pressing
AA
AA
A in the World Time Mode displays the current date (day of the week,
month, day) in the currently displayed city code city. The world time indicator also
appears while the date is displayed. Pressing
AA
AA
A again returns to the city code and
time display.
Selecting Daylight Saving Time (Summer Time)
In the World Time Mode, hold down
AA
AA
A for a few seconds to toggle between daylight
saving time (summer time) and standard time. The DST indicator is on the display
while daylight saving time is turned on.
• The DST setting you make is applied to all World Time Mode cities. You cannot
make separate settings for each city code.
• Note that the display also switches between the current time and current date dis-
play when you hold down
AA
AA
A to change the daylight saving time setting. After mak-
ing your setting, press
AA
AA
A again to display the information (time or date) you want.
EVENT REMINDER MODE
The Event Reminder Mode lets you store up to 10 reminders of past events, each
containing the date (year, month, day) and time (hour, minutes) the event occurred,
and city code that was selected when the event occurred. You can use this feature to
record the date, time, and location (city code) of events as they happen, such as the
start and end of a meeting, how long it takes to drive from one location to another,
etc.
• The 12-hour/24-hour time format for the Event Reminder Mode is the same as the
one you select in the Timekeeping Mode.
Recording an Event Reminder
In the Timekeeping Mode, hold down
CC
CC
C for a few seconds until the display flashes.
• The first event you record is stored as Record 1. When you record a second event,
it is stored as Record 1 and the previous event shifts to Record 2. Records are
shifted each time you input a new one. This means that the newest event is always
Record 1. If you have 10 records stored in memory, the oldest one is Record E
(END).
• You can have up to 10 event records in memory at one time. Recording an eleventh
record causes the oldest record in memory (Record E) to be deleted and the other
remaining records to be shifted to make room for the new one.
Viewing Records in Event Reminder Memory
In the Event Reminder Mode, press
CC
CC
C to scroll through records, starting with the
newest one (Record 1).
• Holding down
CC
CC
C scrolls through records at high speed.
• The date of the record, alternates with its city code and time on the display in one-
second intervals.
Deleting an Event Reminder Record
1.Use
CC
CC
C to display the record you want to delete.
2.Hold down
AA
AA
A for a few seconds until CLR stops flashing on the display.
• Releasing
AA
AA
A while CLR is still flashing cancels the delete procedure without delet-
ing anything.
• The remaining records are shifted accordingly and Record 1 appears after the record
is deleted.