Filter
Top Products
1600/1827-1
Module No.1600/1827
• You can input up to eight characters in the text area, and 12 digits in the number area.
• Make sure that you distinguish between the letter
O and the number 0 (zero).
Inputting a zero for the letter
O will affect automatic sorting.
4. After inputting your data, press A to store it and return to the Telememo Mode.
• When you press A to store data, the message
SORT appears on the display for
a few seconds. After the sort operation is complete, the normal Telememo Mode
display (without the cursor) appears.
• The text area of the display can show only six characters at a time, so longer text
scrolls continuously from right to left.
• If the message
FULL appears in the text area of the display, it means that
memory is full. To store more data, you will first have to delete some of the data
stored in memory.
To recall Telememo data
In the Telememo Mode, press E to scroll forward through stored data items or D to
scroll in reverse.
• Holding down either button scrolls through the data at high speed.
To edit Telememo data items
1. In the Telememo Mode, scroll through the data items and display the one you want
to edit.
2. Press A and a cursor appears in the text area.
3. Use B to move the cursor to the character you want to change.
4. Change the character.
• See “How to input characters” for details.
5. After making the changes that you want, press A to store it and return to the
Telememo Mode.
To delete Telememo data
1. In the Telememo Mode, scroll through the data items and display the one you want
to delete.
2. Press A and a cursor appears in the text area.
3. Press D and E at the same time to delete the data item.
• At this time the cursor appears in the text area, ready for input.
4. Input data or press A to return to the Telememo Mode.
ALARM MODE
You can set five independent alarms with the
hour, minutes, month and date. You can even
input text that appears on the display to remind
you of the purpose of each alarm. Use the Alarm
Mode to turn the alarm and the Hourly Time
Signal on and off.
• When an alarm is turned on, an alarm tone
sounds for 20 seconds when the preset time
is reached.
• When the Hourly Time Signal is turned on,
the watch beeps every hour on the hour.
Alarm Types
The types of alarm you get depends on the information you set.
• To set a Daily alarm
Set the hour and minutes for the alarm time. Set xx for the month and date (see step
4 under “To set alarms”). This type of setting causes the alarm to sound everyday at
the time you set.
• To set a Date alarm
Set the month, date, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specific time, on the specific date you set.
• To set a 1-Month alarm
Set the month, hour and minutes for the alarm time. Set xx for the date (see step 4
under “To set alarms”). This type of setting causes the alarm to sound every day at the
time you set, only during the month you set.
• To set a Monthly alarm
Set the date, hour and minutes for the alarm time. Set xx for the month (see step 4
under “To set alarms”). This type of setting causes the alarm to sound every month at
the time you set, on the date you set.
Cursor
Text area
Number area
[New Data Display]
Name
Telephone number
Mode indicator
Remaining
memory
Seconds Hour Minutes
Date Month Year
Month-Date
Year
Day of week
Hour Minutes
Seconds
PM indicator
Stopwatch ModeDual Time ModeAlarm ModeTelememo ModeTimekeeping Mode
[Module 1827]
Countdown
Alarm Mode
[Module 1600]
TIMEKEEPING MODE
• In the Timekeeping Mode, press D to switch
between the 12-hour and 24-hour formats.
To set the time and date
1. Press A while in the Timekeeping Mode.
The seconds digits flash on the display
because they are
selected
.
2. Press B to change the selection in the
following sequence.
3. While the seconds digits are selected (flashing), press E to reset the seconds to
00. If you press E while the seconds count is in the range of 30 to 59, the seconds
are reset to
00 and 1 is added to the minutes. If the seconds count is in the range
of 00 to 29, the minutes count is unchanged.
4. While any other digits (besides seconds) are selected (flashing), press E to
increase the number or D to decrease it.
• Holding down either button changes the current selection at high speed.
• When the 12-hour format is selected, the indicator P appears on the display to
indicate “p.m.” times. There is no indicator for “a.m.” times. Selecting the 24-hour
format causes the indicator 24 to appear on the display.
5. After you set the time and date, press A to return to the Timekeeping Mode.
• The day of the week is automatically set in accordance with the date.
• The date can be set within the range of January 1, 1995 to December 31, 2039.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
About the backlight
In any mode, press C to illuminate the display for about two seconds.
• The backlight of the watch employs an electro-luminescent (EL) light, which loses
illuminating power after very long use.
• The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
• The watch will emit an audible sound whenever the display is illuminated. This is
caused by a transformer that vibrates when the EL panel lights up. It does not
indicate malfunction of the watch.
• If the alarm time you set in the Alarm Mode is reached while the backlight is turned
on, the alarm tone will not start to sound until the backlight turns off.
TELEMEMO MODE
The Telememo Mode lets you store up to 30
pairs of name and telephone number data. Data
is automatically sorted based on the characters
of the name. You can recall data by scrolling
through it on the display.
• See the “CHARACTER LIST” at the back of
this manual for details on how the watch sorts
data.
• The data item on the display when you exit
the Telememo Mode appears first the next
time you enter the Telememo Mode.
To input new Telememo data
1. In the Telememo Mode, press D or E until
the new data display appears.
• The new data display is the one that is blank
(contains no name and telephone number).
• If there is no Telememo data stored in
memory yet, the new data display appears as
soon as you enter the Telememo Mode.
2. Press A and a cursor appears in the text area.
3. Input a name in the text area and a telephone
number in the number area.
Use D and E to input characters, and B to
move the cursor around the display.
For details, see “How to input characters”.
GENERAL GUIDE
• The operational procedures for Module 1600 and 1827 are identical. All of the illustrations in this manual show Module 1600.
• Press B to change from mode to mode. After you perform an operation in any mode, pressing B returns to the Timekeeping Mode.
• In any mode press C to illuminate the display for about two seconds.
Hour
Minutes
Alarm on indicator Alarm No.
Mode indicator
Month-Date
Text area