Casio 10B+7L(Ver.C) Watch User Manual


 
1
Operation Guide 10B+7L(Ver.C)
PM
PM
Reading the display
[
Regular timekeeping
mode
]
[Stopwatch mode]
[Time/calendar
setting mode]
[Daily alarm mode]
SU: Sunday, MO: Monday, TU: Tuesday, WE: Wednesday, TH: Thursday, FR: Friday, SA: Saturday
(Changeover between 12-hour and 24-hour formats) In regular timekeeping mode,
with every push of A, the display is switched between 12-hour and 24-hour formats.
Day
Minute
Date
(Light)
Mode indicator
Day
Hour
PM
MinutePM
1/100 second
Minute
Hour
Second
Hour
Date
Mode
indicator
Alarm-
on-mark
Time-signal-on-mark
Press
C.
Press
C.
Press
C.
Second
A
C
Minute
Second
Press C.
L
Setting daily alarm
If the daily alarm is set, the buzzer sounds for 20 seconds at the preset time every day
until cleared. To stop the buzzer, press the L button. If the time signal is set, the watch
sounds every hour on the hour.
(Sound demonstration) Press and hold the
A
button in alarm mode to sound the buzzer.
*
If the
C
button is pressed, the watch reverts to the regular timekeeping mode.
(Quick digit advance) When the A button is pressed for more than 2 seconds, the digit
advances quickly. When released, the digit advance will stop.
[Hour setting] [Minute setting]
Press L to set minute digits.
One minute advances with every
push of A. Press L to complete.*
Press L in the daily alarm mode to
set hour. One hour advances with
every push of A.
A
C
L
[On or off setting of daily alarm and time signal]
[The alarm-on-
mark and time-
signal-on-mark
appear.]
[The alarm-on-
mark and time-
signal-on-mark
disappear.]
[The time-signal-
on-mark only ap-
pears.]
The daily alarm
and time signal
sound.
The daily alarm
and time signal
do not sound.
The daily alarm
only sounds.
The time signal
only sounds.
Press A.
Press
A.
Press
A.
Press
A.
[The alarm-on-mark
only appears.]
AC
L
Stopwatch operation
A signal confirms start/stop operation.
(Working range) The stopwatch display is limited to 59
minutes 59.99 seconds, for longer times reset and start
again.
C
L
A
(a) Net time measurement
Start Stop Re-start Stop Reset
Reset
ResetStart
Split
Split release
Stop
Start
Split
The first runner
finishes.
Stop
The second runner
finishes. Record the
time of the first runner.
Split release
Record the time
of the second
runner.
(b) Split time measurement
(c) 1st-2nd place times
Time loss
IMPORTANT: Setting sequence MUST BE FOLLOWED when making any new setting.
[Month setting]
[Date setting] [Day setting]
Correction of any digit, if not required, can be skipped by pressing the L button
repeatedly.
If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the regular timekeeping mode automat-
ically.
Press L to move to the
month setting. Press A to
increase the number.
Press L to move to the date
setting. Press A to increase
the number.
Press L to move to the day
setting. Pressing A advanc-
es to the next day. And press
C to complete.
Setting time and calendar
[
Regular timekeeping
]
PM
Press A to adjust
seconds.*
PM
[Second adjusting] [Hour setting] [Minute setting]
Press C three times
to change regular
timekeeping mode
to time/calendar
setting mode.
Press L to move to
the hour setting.
Press A to increase
the number.
Press L to move to
the minute setting.
Press A to increase
the number.
A
C
L
*
Precise time can be maintained by correcting the seconds once a month on a time signal from
a radio, TV, telephone, etc.
(Quick digit advance) When the A button is pressed for more than 2 seconds, the digit
advances quickly. When released, the digit advance will stop.
Specifications
Accuracy at normal temperature: ±30 seconds a month
Display capacity:
Regular timekeeping mode
Hour, minute, second, am/pm, date and day
Calendar system: Auto-calendar set at 28 days for February
Daily alarm mode
Hourly time signal function
Stopwatch mode
Measuring capacity: 59 minutes 59.99 seconds
Measuring unit: 1/100th of a second
Measuring modes: Normal time, net time, split time and 1st-2nd place times
Battery:
One lithium battery (type: CR-2016 –– except Module 1271/BR-2020 –– Module 1271 only)
Approx. 7 years operation on type CR-2016 (except Module 1271) /10 years on type BR-
2020 (Module 1271 only). [assuming alarm operation for 20 sec./day and one light operation
for 1 sec./day]
NOTE: THERE IS NO WAY unit components can be damaged or malfunction, due to
misoperation of buttons. If confusing information appears on the display it means entry
sequence was incorrect. Please read the manual and try again.
MA1211-ED