Armitron T205(5ATM) Watch User Manual


 
FEATURES
• Conventional Analog Display with Sweep Second Hand
• Time Telling Mode (Hours, Minutes, and Seconds)
• Calendar Mode (Month, Date, and Day)
• 12/24 Hour (Military Time)
• 24 Hour Alarm
• Chronograph Mode with Lap Time to 1/100th of a
Second
• Hourly Chime: One ‘Beep’ sound every full Hour
• Water Resistant as indicated on the watch
SETTING ANALOG TIME
1. Carefully pull Crown out all the way and turn in either
direction until desired time is diplayed.
2. Carefully push Crown back in all the way to resume
time keeping.
SELECTING DIGITAL FEATURES
1. Time Telling Mode displays Hours,
 Minutes, and Seconds.
2. From Time Telling Mode, press ‘C
 once. 24 Hour Alarm Mode appears.
3. Press ‘C’ again. Chronograph Mode
 appears.
4. Press ‘C’ again. Calendar Mode
 appears.
5. Press ‘C’ again to return to Time
 Telling Mode.
SETTING THE TIME
1. From Time Telling Mode, press and
 hold ‘B’ for 2-3 seconds. Seconds
 flash. Press ‘A’ to zero out Seconds.
NOTE: Zeroing out 30 or more Seconds will automatically
add one minute to digital Time Telling.
2. Press ‘B’, Minutes flash. Press ‘A
 to advance the Minutes.
3. Press ‘B’, Hours flash. Press ‘A
 to advance the Hour.
12/24 HOUR (MILITARY) TIME
4. Press ‘B’, ‘12’ flashes to indicate
 12/24 Hour Format Setting. Press ‘A
once. ‘24’ flashes to indicate 24 Hour
Time Format. Press ‘A’ again to return
to normal 12 Hour Format.
5. Press ‘B’ to end setting sequence and
to return to Time Telling Mode.
SETTING THE CALENDAR
1. From Calendar Mode, press and hold
 B’ for 2-3 seconds. Date flashes.
 Press ‘A’ to advance the Date.
2. Press ‘B’, Months flash. Press ‘A
 to advance the Month.
3. Press ‘B’, Day flashes. Press ‘A
 to advance the Day.
4. Press ‘B’ to end setting sequence.
5. Press ‘C’ once to return to Time Telling Mode.
SETTING THE ALARM
1. From Time Telling Mode, press ‘C
once to obtain Alarm Mode.
2. Press and hold ‘B’ for 2-3 seconds.
Alarm Hours flash. Press ‘A’ to
advance the Hour.
3. Press ‘B’, Alarm Minutes flash.
Press ‘A’ to advance the Minutes.
4. Press ‘B’ to end setting sequence.
5. Press ‘C’ three times to return to Time Telling Mode.
ACTIVATING/DEACTIVATING 24 HOUR ALARM
1. From Time Telling Mode, press ‘C
once to obtain Alarm Mode.
2. Press ‘A’ once. Alarm Symbol appears
on the left side of the display to
indicate the Alarm is activated and will
sound at the preset Alarm Time for 
20 seconds or until any button is
pressed.
3. Press ‘A’ to deactivate the Alarm.
4. Press ‘C’ three times to return to Time Telling Mode.
ACTIVATING THE ALARM AND HOURLY CHIME
1. From Time Telling Mode, press and
hold ‘A’. At the same time, press ‘B’.
Hourly Chime symbol appears on the
left side of the display to indicate the
Hourly Chime is activated and will now
sound a beep every hour on the hour.
2. Repeat above procedure to deactivate Hourly Chime.
CHRONOGRAPH
1. From Time Telling Mode, press ‘C’ twice to obtain the
Chronograph Mode.
2. Press ‘A’ to start timing.
3. Press ‘A’ again to stop timing.
4. Press ‘B’ to reset to zero.
LAP TIME
5. To calculate a competitor’s lap time, press ‘A’ to begin
timing.
6. Press ‘B’ to freeze competitor’s lap time. Internal
stopwatch is still counting.
7. Press ‘A’ to freeze competitor’s final time.
8. Press ‘B’. Competitor’s elapsed time will be revealed.
9. Press ‘B’ again to reset to zero.
10. Press ‘C’ twice to return to Time Telling Mode.
WATER RESISTANCE
This is a WATER RESISTANT watch. Do not operate the
push buttons below the surface of the water. Should water
or condensation appear in the watch, immediately have
the watch checked. Water can corrode electronic parts
inside the case.
CHANGING THE BATTERY
Change the battery when the watch becomes slow, the
readout darkens or does not appear, or the backlight
fails. Before removing the old battery, be sure to denote
its polarity so that the new battery is installed in exactly
the same way. Replace with same or equivalent only. This
watch contains precise electronic components and
should only be opened by a qualified watch technician.
However, it is not necessary to return your watch to the
manufacturer for battery replacement. It is recommended
that you bring your timepiece to a local jeweler.
Dear Customer:
Help your watch/jewelry retailer protect our environment
by properly recycling the button cell battery in your watch.
Professional jewelers and watch retailers are best
equipped to replace the battery in your watch without
damage to the watch case and movement inside. They
have the specialized tools and experience to do the job
right. Inexperienced people can scar the case and damage
the water resistant seal – voiding your warranty.
  It is important to recycle your watch battery in an
environmentally safe way. Watch batteries contain very
small amounts of mercury, which is required to prevent
corrosion of the battery and damage to your watch. There
is no danger to you or your watch from the mercury
because it is in the sealed battery. But you need to recycle
your watch battery properly. Your professional watch/
jewelry retailer is the best person to do this for you. These
professionals collect used batteries and recycle them
through licensed waste management companies.
Do our environment and your watch a favor. Ask your
watch/jewelry professional to replace your battery when it
expires.
AB
CROWN
C
9
:
0
0
0
0
P
1
:
0
0
A
L
A
9
:
0
0
0
0
P
5
3
T
U
5
3
T
U
5
3
T
U
1
2
H
2
4
H
1
:
0
0
A
L
A
1
:
0
0
A
L
A
1
:
0
0
A
L
A
WATCH INSTRUCTIONS
T205 (5ATM)
20/1299, 20/1301BLU, 20/1387BLU, 20/1427BLU, 20/1441BLU, 20/1443BLU, 20/1451GMG, 20/1513BLU
9
:
0
0
0
0
P
1
:
0
0
A
L
A
0
0
'
0
0
'
'
0
0
5
3
T
U
9
:
0
0
0
0
P
9
:
0
0
0
0
P
9
:
0
0
0
0
P
9
:
0
0
0
0
P
9
:
0
0
0
0
P