Arkon SM225-S PDAs & Smartphones User Manual


 
CM925-S SM225-S
|
15” Flexible Steel Gooseneck Mount
!
Safety Precautions
Drilling onto the  oor or console can permanently damage the vehicle.
Use caution and consult a mobile install professional to avoid drilling
into the gas tank, electrical system or other highly sensitive vehicle
components.
Arkon Resources, Inc. is not responsible for any damages caused to
your car or yourself due to the installation or use of the pedestal mount.
The Mobile Mounting Specialists™
www.arkon.com
Arcadia, CA 91006 USA
Made in Taiwan
© Copyright 2007 Arkon Resources, Inc.
Consumer Hotline:
(USA) (800) 841-0884
(INT’L) (626) 254-9005
Mon-Fri. 9am-5pm, PST
Position the Floor / Console Bracket and
drill into the  oor or console.
Attach the Floor / Console Bracket with
screws and cover with plastic caps.
Screw the steel shaft into the Floor
/ Console Bracket.
Step 1.
Step 2.
Step 3.
Installation Instructions
Floor Mount
Console Mount
Floor or Console Mounting
For a more permanent mount, connect the
Floor / Console Mount Bracket to the  oor or
console. This will require drilling into your
vehicle’s interior surface.
Package Contents:
(1) Seat Bolt Bracket
(1) Floor / Console Bracket
(1) Flexible Steel Shaft with Plastic Tubing
(1) Dual T Pattern Head
(3) Screws
(4) Plastic Caps
(1) Custom Cradle (CM090 or SM020)
Adjust the steel shaft by bending with
both hands to the desired location of the
male dual T-head.
Use the adjustment knob (A) and wing
nut (B) on the pedestal head to swivel or
rotate the head position if necessary.
Align the female dual T-slots on the
cradle to the dual T-tabs on the pedestal
head. Insert device.
Step 1.
Step 2.
Step 3.
Pedestal Head Adjustments
With a socket wrench, loosen the
passenger seat bolt, insert the Seat Bolt
Bracket, and retighten the seat bolt.
Step 2.
Passenger Seat Bolt Mounting
For a simple mount that can be easily moved
to another vehicle, install using the passenger
seat bolt (no drilling required).
Step 1. Screw the  exible steel shaft into the
Seat Bolt Bracket.
CM088-TS-2 15” Flexible Steel “Gooseneck” Mount
(shown with Seat Bolt Bracket attached)
Connecting the cradle
Slide the T-slots of the cradle onto
the T-tabs of the mount head.
NOTES:
1. Tool for Seat Bolt mounting - socket wrench
2. Tools for optional Floor or Console mounting
- drill and screwdriver
3. Do not twist the cradle or device while
mounted on top of the pedestal to adjust the
steel shaft as this can break the dual T grooves.
!
Safety Precautions
Drilling onto the  oor or console can
permanently damage the vehicle. Use
caution and consult a mobile install
professional to avoid drilling into the gas
tank, electrical system or other highly
sensitive vehicle components.
Arkon Resources, Inc. is not responsible for
any damages caused to your car or yourself
due to the install of the pedestal mount.
Threaded Flexible
Steel Shaft
Seat Bolt Bracket
(A)
(B)
CM090 SM020