Help Requests

Gold's Gym Treadmill Crosswalk 570



Can You Help With These Problems?

  • Posted by grossmanith on Mar 30th, 2014 at 10:07pm

    where are the batteries and where do they go?
    where are the batteries and where do they go?
  • Posted by alstonparker7 on Jan 14th, 2014 at 6:53pm

    when I plug up my 570 crosswalk it starts going up
    when I plug up my 570 crosswalk it starts going up and down inclining and wont stop
  • Posted by emsbaron on Dec 25th, 2013 at 6:19pm

    My front roller is rubbing against the housing, wh
    My front roller is rubbing against the housing, what can I do to correct it?
  • Posted by jeffnterry on Dec 25th, 2013 at 2:40pm

    Incline won't stop
    As soon as I turn treadmill on the incline keeps going up & down. I can't stop it unless I shut it off. Turn it back on & it keeps doing the same thing.
  • Posted by dalchew02 on Mar 13th, 2013 at 12:48pm

    I see a wire coming from the base by the electrica
    I see a wire coming from the base by the electrical cord. It has a red push on connector on the end. Where does it plug in?
  • Posted by bambi0162 on Jan 23rd, 2013 at 6:46pm

    MY GOLD GYM CROSSWALK 570 WONT TURN ON
    MY GOLD GYM CROSSWALK 570 WONT TURN ON
  • Posted by jbaker6508 on Nov 26th, 2012 at 8:48pm

    i bought the floor model of crosswalk 570 an i can
    i bought the floor model of crosswalk 570 an i cant start it. what do i do
  • Posted by hakimabdalla on Oct 27th, 2012 at 10:00pm

    Incline goes up but won't go back down
    Incline goes up but won't go back down
  • Posted by bstand on Oct 14th, 2012 at 12:37pm

    bought the store model of the 570 crosswalk. The s
    bought the store model of the 570 crosswalk. The section where the key is marked is has no access. How do I start this treadmill?
  • Posted by bennett26 on Feb 13th, 2012 at 2:22am

    tread mill will not start
    you hear motor running incline light is flashing but noting else happens have tried reseting same results

    bennett26@cox.net
  • Posted by dejawilkins6 on Jul 16th, 2011 at 2:33am

    Hi. ummm i was trying 2 use the tread mill. in ord
    Hi. ummm i was trying 2 use the tread mill. in order 2 use it you have 2 let it down and instead of pulling the knob i was twisting it. the knob fell off and do did the screw, and i lost it. where can i get the screw 2 put the knob back on?
  • Posted by gary.jenkins on Mar 13th, 2011 at 3:43pm

    Belt not engaging
    display and incline works. Belt will not turn on. I have pressed reset button-same results. The belt will move if you walk on it, but will not engage when presssing the speed buttons. Help
  • Posted by wunder_22 on Jan 15th, 2011 at 4:10pm

    Front roller slightly higher on left side
    My belt has been slipping and I have been tightening it recently to make sure it doesnt slip anymore. The past few days, I noticied that the left front roller is a little higher than the right side and when I run the left side of the belt will grind against the hood of the tredmill. I dont know what…

Ask OwnerIQ Members for Help With A Problem

Let the ManualsOnline Membership help you! Tell us about the problem you're having with this product. Your request will be posted for the ManualsOnline membership to view. You will be notified of responses by email. Required fields are in BOLD.

Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
  



TRUSTe Seal


  • Facebook
  • Twitter
  • ManualsOnline Blog
  • ManualsOnline Google Plus